Hi,
I get some problems using OSPF under
z/VM.
When I start a Suse z/Linux system under my z/VM, I get the class A network 10.0.0.0 that is directed trough the z/Linux system !!
Of course I do not want the class A network to be routed trough my test Linux system.
What I am missing ? Where does the added network 10.0.0.0 comes from ?
17:02:54.508389 DTCMPR7862I Received update interface LINUX1A
17:02:54.508569 DTCMPR8057I Added network 10.0.0.0 to interface 10.27.147.101 on net 7 interface LINUX1A
17:02:54.508758 DTCMPR7827I Adding stack route to 10.0.0.0, mask 255.0.0.0 via 0.0.0.0, link LINUX1A, metric 1, type 1
17:02:54.509557 mprorirt: Recv completes with 228 bytes
17:02:54.510096 DTCMPR7862I Received update interface LINUX1A
17:02:54.510523 DTCMPR8061I Deleted net 10.27.147.1 route via 10.27.147.101 net 7 interface LINUX1A
17:02:54.510704 DTCMPR8061I Deleted net 10.0.0.0 route via 10.27.147.101 net 7 interface LINUX1A
17:02:54.510893 DTCMPR7864I Deleting all stack routes to 10.0.0.0, mask 255.0.0.0
17:02:57.787530 mprorirt: Recv completes with 228 bytes
17:02:57.788022 DTCMPR7862I Received update interface LINUX1A
17:02:57.788162 DTCMPR8057I Added network 10.0.0.0 to interface 10.27.147.101 on net 7 interface LINUX1A
17:02:57.788237 DTCMPR7827I Adding stack route to 10.0.0.0, mask 255.0.0.0 via 0.0.0.0, link LINUX1A, metric 1, type 1netstat gate
VM TCP/IP Netstat Level 510Known IPv4 gateways:NetAddress FirstHop Flgs PktSz Subnet Mask Subnet Value Link
---------- -------- ---- ----- ----------- ------------ ------
10.0.0.0 <direct> U 576 <none> LINUX1A
10.0.0.0 10.27.186.196 UG 1200 0.255.252.0 0.22.40.0 LIL1_O2
10.27.147.1 <direct> UHS 4096 HOST LINUX1A
10.27.147.2 <direct> HS 4096 HOST LINUX2A
10.0.0.0 <direct> U 1200 0.255.255.192 0.27.186.192 LIL1_O2Known IPv6 gateways: None
Area
Area_Number=1.9.6.6
Authentication_Type=Password;
Comparison=Type2
OSPF_Interface
IP_Address=10.27.186.199
Name=LIL1_O2
Subnet_Mask=255.255.255.192
Destination_Addr=10.27.186.200
Attaches_To_Area=1.9.6.6
Authentication_Key="xxxxxxxx"
MTU=1200
Router_Priority=0
Cost0=50;
;
RouterID=10.27.186.199
;
OSPF_Interface
IP_Address=10.22.61.19
Name=VLIL1_2
Subnet_Mask=255.255.255.192
Attaches_To_Area=1.9.6.6
Cost0=100;
;
AS_Boundary_Routing
Import_Static_Routes=Yes
Import_Direct_Routes=Yes
Import_Subnet_Routes=Yes;
Below is my configuration (For TCIP under z/VM) :
DEVICE OSALNK2 OSD 1306 PORTNAME PORT00E3 NONROUTER
LINK LIL1_O2 QDIOETHERNET OSALNK2
DEVICE CTCLNX1A CTC 1DF8
LINK LINUX1A CTC 0 CTCLNX1A
DEVICE VCTCLIL1 VIRTUAL 0
LINK VLIL1_2 VIRTUAL 0 VCTCLIL1
HOME
10.22.61.19 VLIL1_2
10.27.186.199 LIL1_O2
10.27.147.101 LINUX1A
GATEWAY
10.27.147.1 = LINUX1A 4096 HOST
For the Suse TCPIP I only have defined the CTC link 10.27.147.1 peered with the 10.27.147.101.
Thanks for any help
Laurent
Dubois