:-) Laurent Dubois - Equipe VM
-----Message d'origine-----
De : The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
Envoyé : lundi 23 octobre 2006 17:52
À : IBMVM@LISTSERV.UARK.EDU
Objet : Re: OSPF problemLaurent,
When interfaces are not defined to MPRoute in the MPROUTE CONFIG file, MPRoute will use the default class mask. In your case the mask of 255.0.0.0 is used.
So, you need to define your Linux interface LINUX1A in the MPROUTE CONFIG file using the INTERFACE statement .
Peggy Williams
z/VM - TCP/IP Development
IBM Endicott
EXT / DUBOIS Laurent <[EMAIL PROTECTED]>
EXT / DUBOIS Laurent <[EMAIL PROTECTED]>
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>10/23/2006 11:29 AM
Please respond to
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
OSPF problem
Hi,
I get some problems using OSPF under z/VM.When I start a Suse z/Linux system under my z/VM, I get the class A network 10.0.0.0 that is directed trough the z/Linux system !!
Of course I do not want the class A network to be routed trough my test Linux system.
What I am missing ? Where does the added network 10.0.0.0 comes from ?
Below is my configuration for MPROUTE :
17:02:54.508389 DTCMPR7862I Received update interface LINUX1A
17:02:54.508569 DTCMPR8057I Added network 10.0.0.0 to interface 10.27.147.101 on net 7 interface LINUX1A
17:02:54.508758 DTCMPR7827I Adding stack route to 10.0.0.0, mask 255.0.0.0 via 0.0.0.0, link LINUX1A, metric 1, type 1
17:02:54.509557 mprorirt: Recv completes with 228 bytes
17:02:54.510096 DTCMPR7862I Received update interface LINUX1A
17:02:54.510523 DTCMPR8061I Deleted net 10.27.147.1 route via 10.27.147.101 net 7 interface LINUX1A
17:02:54.510704 DTCMPR8061I Deleted net 10.0.0.0 route via 10.27.147.101 net 7 interface LINUX1A
17:02:54.510893 DTCMPR7864I Deleting all stack routes to 10.0.0.0, mask 255.0.0.0
17:02:57.787530 mprorirt: Recv completes with 228 bytes
17:02:57.788022 DTCMPR7862I Received update interface LINUX1A
17:02:57.788162 DTCMPR8057I Added network 10.0.0.0 to interface 10.27.147.101 on net 7 interface LINUX1A
17:02:57.788237 DTCMPR7827I Adding stack route to 10.0.0.0, mask 255.0.0.0 via 0.0.0.0, link LINUX1A, metric 1, type 1
netstat gate
VM TCP/IP Netstat Level 510
Known IPv4 gateways:
NetAddress FirstHop Flgs PktSz Subnet Mask Subnet Value Link
---------- -------- ---- ----- ----------- ------------ ------
10.0.0.0 <direct> U 576 <none> LINUX1A
10.0.0.0 10.27.186.196 UG 1200 0.255.252.0 0.22.40.0 LIL1_O2
10.27.147.1 <direct> UHS 4096 HOST LINUX1A
10.27.147.2 <direct> HS 4096 HOST LINUX2A
10.0.0.0 <direct> U 1200 0.255.255.192 0.27.186.192 LIL1_O2
Known IPv6 gateways: NoneBelow is my configuration (For TCIP under z/VM) :
Area
Area_Number=1.9.6.6
Authentication_Type=Password;
Comparison=Type2
OSPF_Interface
IP_Address=10.27.186.199
Name=LIL1_O2
Subnet_Mask=255.255.255.192
Destination_Addr=10.27.186.200
Attaches_To_Area=1.9.6.6
Authentication_Key="xxxxxxxx"
MTU=1200
Router_Priority=0
Cost0=50;
;
RouterID=10.27.186.199
;
OSPF_Interface
IP_Address=10.22.61.19
Name=VLIL1_2
Subnet_Mask=255.255.255.192
Attaches_To_Area=1.9.6.6
Cost0=100;
;
AS_Boundary_Routing
Import_Static_Routes=Yes
Import_Direct_Routes=Yes
Import_Subnet_Routes=Yes;For the Suse TCPIP I only have defined the CTC link 10.27.147.1 peered with the 10.27.147.101.
DEVICE OSALNK2 OSD 1306 PORTNAME PORT00E3 NONROUTER
LINK LIL1_O2 QDIOETHERNET OSALNK2
DEVICE CTCLNX1A CTC 1DF8
LINK LINUX1A CTC 0 CTCLNX1A
DEVICE VCTCLIL1 VIRTUAL 0
LINK VLIL1_2 VIRTUAL 0 VCTCLIL1
HOME
10.22.61.19 VLIL1_2
10.27.186.199 LIL1_O2
10.27.147.101 LINUX1A
GATEWAY
10.27.147.1 = LINUX1A 4096 HOSTThanks for any help
Laurent Dubois