Alan,
THANK YOU, THANK YOU, THANK YOU. Your help was just what I needed.
If you haven't been told today, "You ROCK!"
Dave
-----Original Message-----
From: Alan Altmark <[EMAIL PROTECTED]>
Reply-To: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: TCPIP troubleshooting
Date: Tue, 20 Nov 2007 17:12:31 -0500
On Tuesday, 11/20/2007 at 02:40 EST, Dave Keeton <[EMAIL PROTECTED]>
wrote:
> Thank you, Alan. Using ifconfig, I see that the interface is listed as
DOWN:
>
> GBE200 inet addr: 10.254.145.64 mask: 255.255.255.0
> DOWN MTU: 8992
> vdev: 2912 rdev: 2912 type: QDIO ETHERNET portname: DEV2900
> ipv4 router type: NONROUTER ipv6: DISABLED
> cpu: 0 forwarding: ENABLED
> RX bytes: 1080326 TX bytes: 1719553
>
> When I try to bring it up with "ifconfig gbe200 up", it says:
>
> DTCIFC2654E TCPIP is unable to link to your 191 minidisk which is
> DTCIFC2654E currently accessed as file mode A
>
> and the interface says down. I've tried it as TCPMAINT and as MAINT
(linking to
> TCPMAINT's 592 disk).
ifconfig gbe200 up -mdiskpw password
You have to provide the password for your A-disk.
Alternately, NETSTAT DEV to get the device name associated with link
GBE200 and "NETSTAT OBEY START <device name>".
If Miguel *really* cared about us, he'd fix ifconfig to use NETSTAT OBEY
instead of OBEYFILE. ;-)
Alan Altmark
z/VM Development
IBM Endicott
Dave Keeton
Systems Programmer
Enterprise Systems
Oregon State Data Center
(503) 373-0832
email: [EMAIL PROTECTED]
