We don't have MAXDEV set coded in our IOCP for our z800, and dynamic configuration is enabled and does work (I have used it once or twice).
On Thu, Dec 10, 2009 at 1:43 PM, Frank M. Ramaekers <framaek...@ailife.com>wrote: > Do you have this coded in your IOCP? > > > > RESOURCE PART=((VM,1),(DUMMY,2)), X > > MAXDEV=(MAX) > > > > > > Frank M. Ramaekers Jr. > > > > Systems Programmer > > MCP, MCP+I, MCSE & RHCE > > American Income Life Insurance Co. > > Phone: (254)761-6649 > > 1200 Wooded Acres Dr. > > Fax: (254)741-5777 > > Waco, Texas 76701 > > > > > > > > > ------------------------------ > > *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On > Behalf Of *Kris Buelens > *Sent:* Thursday, December 10, 2009 1:38 PM > > *To:* IBMVM@LISTSERV.UARK.EDU > *Subject:* Re: SET CONFIGMODE ON fails > > > > I think I've got the SE settings OK, but I'm afraid I miss Allan's item > 2. IOCDS must have expansion room (MAXDEV in IODF) > But, I don't have an IODF, just an IOCP (can't check this from home).. > > Anyhow, I've got quite some items to verify on my next visit. Thanks to > all. > > 2009/12/10 Gregg <reed.gr...@gmail.com> > > See Page 5-14 of the z800 SE manual at resource link** > > > > If a power-on reset of the CPC initially enables dynamic I/O configuration, > a task becomes available on the support element workplace for changing the > CPC’s dynamic I/O setting without performing another power-on reset. To > change the CPC’s dynamic I/O setting without performing a power-on reset: > > > > Single Image, > > . > > 2. Open the > > *Task List *from the *Views *area. > > 3. Open *CPC Operational Customization *from the *Task List Work Area*. > > The CPC Operational Customization list contains the *Enable/Disable > Dynamic Channel Subsystem *task that you will start. *5-14 *zSeries: > Support Element Operations Guide > > -- > Gregg Reed > "No Plan, survives execution" > > > > > -- > Kris Buelens, > IBM Belgium, VM customer support > _____________________________________________________ This message contains > information which is privileged and confidential and is solely for the use > of the intended recipient. If you are not the intended recipient, be aware > that any review, disclosure, copying, distribution, or use of the contents > of this message is strictly prohibited. If you have received this in error, > please destroy it immediately and notify us at privacy...@ailife.com. >
