I'm trying to upgrade my Bondi and have, so far, replaced the hard drive, added RAM and tried to install a Harmoni board. I made the mistake of trying to do too many things at once and when a bad 256M RAM module messed up the Harmoni installation, I ended up booted into open firmware. I read from another posting on this site that I could type "mac-boot" to get back to my OS but that just gives me a blank gray screen. The paperclip reset gives me a new chime and the machine comes right back up in open firmware. Any ideas??? Present config: 233MHz 120G WD harddrive w/4 partitions: #1 is 7.65G and the other three are 28+G each 512M memory OS 10.2.8 is loaded in partition 1 OS 9.2.2 is loaded in partition 2 I had to return the Harmoni card because it would not boot up. I am waiting for the replacement. Both OS's have been running and worked fine until the open firmware problem. Thanks, Jon Bright
-- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com ---------------------------------------------------------------
