We set up an IM server on the same LAN Segment as the probe. The outages continue. It appears that IM doesn't always recognize the response from the Nagios device or the probe doesn't always recognize all IM requests. The next step would be a sniffer, something that we don't have time for right now.
Does anyone else have TempTrax running with IM? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mel Beckman Sent: Wednesday, November 05, 2003 12:05 PM To: InterMapper Discussion Subject: RE: Nagios false down reads I was suggesting you set this up as a lab test with a spare temp probe. What model device is it? (I think you mentioned the brand in your original message, but that's scrolled out of my inbox). -mel >The probe is 300 miles from the server. I will consider getting a >server in that closet, but the reason that the probe is there, is that >it's a remote, unattended locaiton. > > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Mel Beckman >Sent: Wednesday, November 05, 2003 10:56 AM >To: InterMapper Discussion >Subject: RE: Nagios false down reads > >Mike, > > At times like these, I like to simplify the problem. Can you >connect a probe directly to an Intermapper server with no intervening >devices or other traffic? Perhaps the problem is with the temperature >probe's SNMP stack? I know some early APC SNMP environmental probes >(the MeasureUPS) would die if pinged or queired too frequently. > > -mel > > >>Yes, I thought just as you did, but increasing the time, seems to >>increase the timeout. Odd. >> >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Christopher L. >>Sweeney >>Sent: Wednesday, November 05, 2003 9:58 AM >>To: InterMapper Discussion >>Subject: RE: Nagios false down reads >> >>At 9:04 AM -0700 11/5/03, Mike Lieberman wrote: >>>-----Original Message----- >>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>>Sent: Wednesday, November 05, 2003 10:06 AM >>>To: [EMAIL PROTECTED] >>>Subject: Attn: Down: Cheyenne Temp >>> >>>11/05 10:02:37: IM/NS3 4.1.2b2 >>> >>>Event: Down >>>Name: Cheyenne Temp >>>Document: netwright >>>Address: 216.169.4.18 >>>Probe Type: Nagios Template >>>Condition: Command timed out. >>> >>>Time since last reported down: 1 hour, 53 minutes, 11 seconds >>>Device's up >>>time: N/A >> >>So it _is_ timing out, apparently, which means the command did not >>complete in the alloted time and no response code was received. As you >>know, you can increase the timeout for the probe. I'm seem to recall >>you saying that it didn't help when you tried it before, though? >> >>-- Christopher >>-- >>================================================ >>Christopher L. Sweeney >>[EMAIL PROTECTED] >>http://www.dartware.com/ >> >>____________________________________________________________________ > >List archives: > >http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > >To unsubscribe: send email to: > [EMAIL PROTECTED] > > > > > >____________________________________________________________________ >>List archives: >>http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ >>To unsubscribe: send email to: [EMAIL PROTECTED] > > >____________________________________________________________________ >List archives: >http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ >To unsubscribe: send email to: [EMAIL PROTECTED] > > >____________________________________________________________________ >List archives: >http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ >To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
