I was receiving this message when I added that path: "The specified database location is not a valid PostgreSQL database folder". Once I changed the path it said I needed to restart the database.
Patrick Fowler, CCSP Network Engineer Denovo -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Schnur Sent: Tuesday, March 16, 2010 4:00 PM To: InterMapper Discussion Subject: Re: [IM-Talk] Move InterMapper to new drive on server Hi Patrick, What didn't it like about E:\IM_Database? I don't see any problems with that path. When you visit the DataCenter web interface, what does it say the database is doing? David On 3/16/2010 5:05 PM, Patrick Fowler wrote: > Thanks. I was able to move the database. I had to specify the correct path. > I was using E:/IM_Database but it didn't like that. I ended up using > E:/IM_Database/dwf/config/database. > > When I started the database, some processes continues to run the CPU up to > 100%. The processes that are eating up the cpu is postgres.exe and imdc.exe > It been about 30 mins since I've restarted the database service and they > continues to use up the cpu. This is affecting the polling. The maps are > reporting packet loss on devices. -- David Schnur Dartware, LLC http://www.dartware.com ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
