Hi,
* Linux 2.6.15-1.1833_FC4 #1 Wed Mar 1 23:41:37 EST 2006 i686 athlon
i386 GNU/Linux
* ivtvctl version 0.4.3 (tagged release)
I don't seem to get things right with ivtv.
I compiled a new kernel
I followed these instructions http://ivtvdriver.org/index.php/Howto:Fedora
I installed the latest firmware http://ivtvdriver.org/index.php/Firmware
But I can't get rid of the ivtvt warnings. I'm slowly running out of
options.
Why do I get the warnings and what do they mean?
# dmesg
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 9 (level,
low) ->
IRQ 9
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: The eeprom says no radio is present, but the tuner type 60
tveeprom: indicates otherwise. I will assume that radio is present.
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 2993543
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom =
0x74,
v4l2 = 0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Create encoder radio stream
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c
driver #0
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc0045627!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40046d11!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40045613!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40045612!
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
here's what I have about ivtv in my /etc/modprobe.conf
I'm not sure if I'm using the right value for tuner (38). I tried differend
onces, this one seems to set the tuner to PAL (which is what I want).
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
options ivtv ivtv_debug=1 tuner=38
Now when I run "mplayer -vo xv /dev/video0" I get no output. Not even a
window!
I can play mpeg-files however. If i use "cat /dev/video0 > test.mpg" an fire
up "mplayer test.mpg" I get:
MPlayer 1.0pre7try2-3.2.3 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices (Family: 8, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not open config files /root/.lircrc and /etc/lircrc
mplayer: No such file or directory
Failed to read LIRC config file ~/.lircrc.
You will not be able to use your remote control.
Playing test.mpg.
Win32 LoadLibrary failed to load: avisynth.dll,
/usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll
Seek failed
Exiting... (End of file)
The line about "Win32 LoadLibrary" is funny because it's linux I'm working
on.
The test.mpg is allways 0Kb so that probably means no output is generated by
/dev/video0 I guess.
Some help would be apreciated.
Tnx.
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
