Hi, I've tested all of this again, this time with a 18F4550 (it was a 18F2550), just to be sure. Everything works great. I've used Rob's 18F4550 tbl file to test Tiny, then adapted original 18F2550 one to run @ 48MHz so USB can be used, for both 18F2550 and 18F4550.
I've put these files in "/project/jaluino". I can move them on another SVN, like this one: http://code.google.com/p/jaluino/ :), if things are getting too big. Cheers, Seb -- Sébastien Lelong http://www.sirloon.net http://sirbot.org 2009/8/14 Sebastien Lelong <[email protected]> > Hi Albert, > > Without any cap, can you still program the PIC via ICSP? > > > No... I guess I have my answer :) > > > Seb > > >> >> Hi guys, >> >> I've tried to put a cap between RTS and RESET/MCLR, as Albert suggested >> and >> funlw65 (Vasi ?) pointed into Sanguino link. It works ! (woohoo). I tried >> different values: 100nF, 220nF, 1F, 47F, 100F, all seems to work. I even >> tried without any cap, and it works too (I'd ask why put a cap then ?). >> 100nF is ok ? >> >> I hope my results are reliable ! :) >> >> Cheers, >> Seb >> -- >> Sbastien Lelong >> http://www.sirloon.net >> http://sirbot.org >> >> >> 2009/8/14 Richard <[email protected]> >> >> > >> > Hi all, >> > >> > If RTS in low state must initiate a reset than the reset circuit in >> > Jaluino is no good. >> >> The idea Alberts mentioned is the best (easy and cheapest) way to >> > correct this. >> > Please let me know if RTS low must give a reset so i can change the >> > Jaluino schematic >> > and PCB. >> > >> > Greetz >> > >> > Richard >> > >> > >> > >> > > >> > >> >> >> >> >> >> >> > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
