Hi Arianna, I'm glad to hear you've got it straightened out. You might want to make some notes on this one! lol Richard Justice www.blind-computing.com ----- Original Message ----- From: "Arianna Calesso" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Saturday, March 03, 2007 6:52 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer
Thanks to Leonard, I have it working just fine now. What would we all do without these helpful, caring lists? Sharing the gift of knowledge is one of the best things we can do! I'm grateful to everyone who helped me get this working. Arianna Calesso ----- Original Message ----- From: "Ricque" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Saturday, March 03, 2007 2:47 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Hi Arianna, Probably plenty of people have run up against the same problem you are having unfortunately, they probably aren't memebers of this list. grin Hope you get it straightened out, Richard Justice www.blind-computing.com ----- Original Message ----- From: "Arianna Calesso" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Saturday, March 03, 2007 10:42 AM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer No, I'll have to look into those bulletins and see if there's anything about this. It seems strange that no one has had to deal with this situation. Arianna Calesso ----- Original Message ----- From: "Ricque" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 6:27 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Hi Arianna, I'm sorry, I am not sure what to tell you on that one. Have you tried the technical service bulletins on the FS website? Richard Justice www.blind-computing.com ----- Original Message ----- From: "Arianna Calesso" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 4:57 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer I have set the Dec32 as the default, but before I can press my hotkey to start JAWS i have to press enter on the Load Dec Access32 icon on my desktop. Once Dec is loaded JAWS will come up using it as the synth. Is there any way I can put somthing in the .ini file or somewhere to make Dec load just before JAWS when I hit the hotkey? that is my question. Thanks for your patience. Arianna ----- Original Message ----- From: "Ricque" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 4:06 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Hi Arianna, I would have to check further, but as far as I know the Access 32 from G W Micro will not work with Jaws. If you do get it installed, the best you can do is this: 1. go into the Jaws default configuration manager and then synthesizer options. 2. if the Deck talk shows up there, then select it as your default, then close the dialogue, and save your settings when leaving the configuration manager. 3. re-boot the computer, and see what happens. If you need more assistance, let us know. HTH, Richard Justice www.blind-computing.com ----- Original Message ----- From: "Arianna Calesso" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 12:22 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Yes, it is the one from GW Micro. Arianna ----- Original Message ----- From: "Ricque" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 12:14 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Hi Arianna, I haven't been following this thread, but is this the software synth? Richard Justice ----- Original Message ----- From: "Arianna Calesso" <[EMAIL PROTECTED]> To: "j-list" <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 11:56 AM Subject: [JAWS-Users] DecTalk Access32 as default synthesizer I asked this question earlier in the week about using DecTalk Access32 as my default synth. David recommended that I look on the JAWS users site for setting up a default synth, but that didn't solve my problem. Dec Access32 needs to be loaded and I need to know how I set this up so that it will happen automatically when I start JAWS. I hope this is clear enough for someone to give me an answer. Do I need to put something in the .ini file or how do I get Dec Access32 to come up as the JAWS synth? Arianna Calesso --~--~---------~--~----~------------~-------~--~----~ Visit the JAWS Users List home page at: http://www.jaws-users.com Address for the list archives: http://www.mail-archive.com/jaws-users-list%40googlegroups.com/ In order to contact the management team simply fill out the following form found at: http://www.jaws-users.com/contact.php You received this message because you are subscribed to the Google Groups "JAWS Users List" group. To post to this group, send email to jaws-users-list@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/jaws-users-list?hl=en -~----------~----~----~----~------~----~------~--~---