Hi,
If you already have one Braille display in use and want to add another, I
think it should work OK. However, I found when I first wanted to use the
BLT that I had no option but to install a fresh copy of JAWS. Simply
editing the JFW.INI and adding the necessary driver did not work as I
didn't have any Braille translation table installed.
Hope this helps.
--
Carol Pearson
[EMAIL PROTECTED]
At 18:10 01/06/99 +1200, Mark Mulcare wrote:
>Hi Tony,
>
>I must first warn you, I have not tried this so can't promise
>it will work, and i would certainly recommend doing an install as
>a much cleaner approach, however :
>
>You can edit your jfw.ini file and change the [brailledisplays]
>section so it looks like the example below.
>
>[BrailleDisplays]
>Braille1Name=pb40
>Braille1LongName=PowerBraille 40
>Braille1Port=com2:9600,n,8,1
>Braille1Driver=Powerbrl
>
>Of course, change com2 to com1 on the brailleport line if your display is on
>com1, not com2.
>
>Be sure to copy jfw.ini before you start in case this doesn't work and you
>should go into config manager and set your braille options on the
>default.jcf
>file when you start jaws with the braille display.
>
>I'd still recommend re-installing jaws, it would be much more likely
>to achieve the result simply than playing around with the jfw.ini file
>and, not having proved this myself, I would not recommend this approach
>to inexperienced computer users.
>
>
>Best of luck, Mark
>-----Original Message-----
>From: Tony Meade <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Tuesday, 1 June 1999 11:50
>Subject: JFW & the PB40
>
>
>Hi Folks: Can someone explain to me how to go about adding the PB40 Braille
>display to JFW 3.2 without having to re-install? Thanks in advance.
>
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
>
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
-
Visit the jfw ml web page: http://jfw.cjb.net
