Her it is again
The first place you have to go is to the
DECtalk WEB Site at the following URL address:
http://www.digital.com/oem/products/dectalk/dtalk.htm
<http://www.digital.com/oem/products/dectalk/dtalk.htm>
Once you are in this site, go to the "Support" section, and then go to the
"download" section. In the download section, there is a section for the
DECtalk PC1. Please make sure you are in the PC1 area, not the PC2 or the
DECtalk Express areas.
1) Then, following the instructions, download the file called 4.2.cc and
install it on your PC.
2) Then, download the file called 4.2.cd and place these files in the same
directory where you installed the 4.2.cc file. The 4.2.cd file will
overwrite certain pieces of the 4.2.cc file with bug fixes. Please note
that the 4.2.cd file is not an installation file; it is simply a bug-fix
file that overwrites certain sections of the 4.2.cc file, so don't use the
install routine for 4.2.cd.
3) If you are in the Windows environment, you are now finished and
should be able to use DECtalk with JAWS with no problems with the accented
characters.
4) If you are in DOS, there is one additional step you need to do: go
into the DECtalk directory where you installed 4.2.cc and 4.2.cd and scan
through the dt.bat files until you find the dt_load statement that should
look like this:
dt_load kernel.sys dtpcdic.dic lts.exe ph.exe cmd.exe usa.exe
ADD at the end of this line the following argument: dtpc_850.exe
When you are finished, the command line should read like this:
dt_load kernel.sys dtpcdic.dic lts.exe ph.exe cmd.exe usa.exe
dtpc_850.exe > NUL
5) You are now ready to use DECtalk in the DOS environment.
PLEASE NOTE: this should be used in a 'pure' DOS environment, that is, you
should not be running DOS in a Windows window.
I hope this resolves the issue for you..
At 11:49 PM 10/19/99 -0700, you wrote:
>Hi Walter,
>
>At 03:51 PM 10/19/99 -0500, you wrote:
>>Tom, which dectalk card are you using.
>
>It's a PC1. Didn't I mention that? Hmmm.
>
>This problem is definitely a
>>dectalk problem.
>
>Oh, really? Perhaps, but why can I read accented characters using a
>different screen reader with its particular Dectalk driver with no ill
>effects?
>
> I use to have the same problem, and I wrote to dectalk
>>about it, and a nice lady over there gave me the fix for my dectalk pc 1
>>card. She did remind me that the pc 1 was an old card, which I already
>>knew, but her fix worked. I have not had any crashes from those foreign
>>accented characters since.
>
>Well, whom did you contact and what was the solution? I'm sure a number of
>us on the list might benefit from this information. How about it?
> Cheers!
>Tom
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
>
Walter
-
Visit the jfw ml web page: http://jfw.cjb.net
