Hi,

Yes, I think the documentation is a little confusing.  Blazie's information
is good but I found it difficult to get to grips with both approaches, at
least until I'd been through the process of installation a couple of times.

Anyway, all the best with your endeavours.  I suggest you may wish to join
Blazie's Driver Support List.  Let me know if you need the info.


--
Carol Pearson
[EMAIL PROTECTED]



At 09:40 25/10/99 +1300, Vaughan Dodd wrote:
>Hi Carol.
>
>Well - it looks like the third attempt at a complete install of 
>v31.35.  Can't remember whether the braille lite was turned on as described 
>when I ran the second install.  Seems obvious to me but so far I am 
>unimpressed with the documentation on this matter from H.J.  ar
>
>Thanks.
>
>Vaughan.
>
>At 07:00 AM 10/25/99 , you wrote:
>>Hi there,
>>
>>You need half duplex setting on Braille Lite.  Further to this, if you
>>didn't choose to have a braille display when installing JAWS, you will need
>>to install again and, even if you did choose the BLT, if the BLT was not
>>turned on and connected to the computer, you will still need to re-install
>>JAWS.  In addition, before starting your installation, use the AR-Chord+P
>>combination before starting the installation.
>>
>>Hope this helps.
>>
>>
>>--
>>Carol Pearson
>>[EMAIL PROTECTED]
>>
>>
>>
>>At 16:20 24/10/99 +1300, Vaughan Dodd wrote:
>> >Hi all.
>> >
>> >I'm attempting to get the bl2000 to run with the latest release of JFW as
>> >per JFW's installation of the Braille Lite as a braille display.
>> >
>> >Pc and Braille LIte agree on the serial port settings: 9600 with no
parity,
>> >eight databits and one stop bit.  The braille lite is set to half duplex
>> >and both have handshaking as xon-xoff.  Braille lite is chorded into
>> >speechbox mode but i can't get JFW to send to the braille lite.  Have
tried
>> >speech turned off.  Can't get any braille at all from the Braille LIte.
>> >
>> >Have tried JFW's braille display settings but as i'm moving into an area
>> >for me which is quite new i've eventually left the defaults presuming that
>> >they are most likely right.
>> >
>> >Any suggestions greatfuly appreciated and tried as they are received.
>> >
>> >Thanks.
>> >
>> >Vaughan.
>> >
>> >
>> >-
>> >Visit the jfw ml web page: http://jfw.cjb.net
>> >
>>
>>-
>>Visit the jfw ml web page: http://jfw.cjb.net
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>

-
Visit the jfw ml web page: http://jfw.cjb.net

Reply via email to