2008/5/7 sebb <[EMAIL PROTECTED]>: > 2008/5/7 Steve Kapinos <[EMAIL PROTECTED]>: > > > The overall goal is to have a monitoring thread running in paralell to a > > second thread that is running tests. The second thread will continually > > be looping running tests and recording (and hopefully adding assertions) > > to the response. The first thread running the actual test samplers is > > the one that is intended to control how long the test actually runs. > > > > So the first threadgroup will run for a fixed # of loops. But I want > > the second threadgroup to loop 'forever' until the first one is done. > > How can I set this up so when the first threadgroup is done, the entire > > test plan stops (and any running threads also complete!) > > > > Can this be done? Better solutions to introducing a monitoring thread > > issuing samplers concurrent to your test? > > > > I see the Result Status Action handler is there that can stop an entire > > test, but can't think of a good criteria to check against.. Especially > > one that wouldn't abort other threads from the first threadgroup that > > have yet to complete. The first threadgroup is configured to execute > > multiple threads, each looping a number of times. I in effect, want to > > stop the entire test when that entire threadgroup is complete. > > > > Something like this should work: > > ThreadGroup1 Loops 1 > + Loop Controller Loops N > + + Main test > + TestAction StopTest > + + Synchronizing Timer count=threadcount > > ThreadGroup2 > + etc > > The timer runs before the sampler(s) to which it applies, so it will > wait for all the threads if you set the count to the number of threads >
Duh! Not quite right, as the Test Action only applies to the current thread group. However you can use the following instead: + Java Request (set Status != OK) + + Synch timer + + Result Status Action Handler (Stop Test) > > > -Steve > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
