When using 10 or 100. There is no such thing at 1000-half (at least defined in the standard).
~Brandon On 10/1/07, Sabri Berisha <[EMAIL PROTECTED]> wrote: > On Tue, Oct 16, 2007 at 10:51:22PM +0900, usacox wrote: > > Hi, > > > Thank you for your reply. > > > > I configured same setting both interfaces with auto-negotiation. > > > > I am looking with no-autonegotiation configuration without its fellow > > after this problem. > > Some devices implicitly disable auto-negotiation when you explicitly > configure speed and duplex settings. For J-series interfaces, the Fast > Ethernet PIMs automatically disable auto-negotiation if you configure > both speed and duplex settings. The Gigabit Ethernet PIMs do not, if you > want to disable auto-negotiation on GE you will have to do so under > gigether-options. > > If you have a link where one end is doing auto-negotiation and the other > is not, you will end up with the first end (the one doing auto-neg) in > half-duplex. This is the specified default according to 802.3u. > > Thanks, > > -- > Sabri > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp