On Tue, Oct 16, 2007 at 09:18:30AM -0600, Brandon Bennett wrote: Hi,
> When using 10 or 100. There is no such thing at 1000-half (at least > defined in the standard). That's, correct. However, the following config is valid: ge-0/0/3 { speed 100m; link-mode full-duplex; gigether-options { no-auto-negotiation; } unit 0 { family inet { address 10.0.3.2/24; } } } When linked to another ge interface, you get: ge-5/0/3 { unit 0 { family inet { address 10.0.3.1/24; } } } Autonegotiation information: Negotiation status: No-autonegotiation Link partner: Link mode: Half-duplex, Flow control: None, Remote fault: OK, Link partner Speed: 100 Mbps Thanks, -- Sabri _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp