Hi, I just installed my first juniper M7i in the production couple of hour back and after resolving few routing issue so far it is running smoothly. I noticed that my PE-1GE-SX-B interface is showing only "Policed discards", the counter which increases by 1 in every 1-2 secs but the inbuilt GE is showing no errors. As I am not running any qos/policing in the interface I was wondering what does it means..and how to fix this error? the router's both interface is connected with a Cisco 3400ME in different Vlan.
interfaces { ge-0/0/0 { description " Cisco3400-ME Gi0/1 Vlan2"; unit 0 { family inet { address 192.168.0.1/28; } } } Delay: 1/0/1 Interface: ge-0/0/0, Enabled, Link is Up Encapsulation: Ethernet, Speed: 1000mbps Traffic statistics: Current delta Input bytes: 3589144576 (34951312 bps) [26149611] Output bytes: 4117970233 (36219936 bps) [27659648] Input packets: 12654493 (15073 pps) [90668] Output packets: 13058310 (15834 pps) [94510] Error statistics: Input errors: 0 [0] Input drops: 0 [0] Input framing errors: 0 [0] Policed discards: 558 [4] L3 incompletes: 0 [0] L2 channel errors: 0 [0] L2 mismatch timeouts: 0 [0] Carrier transitions: 0 Output errors: [0] Regards, Samit _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp