Am 24.07.2012 07:21, schrieb Antti Ristimäki: > On 2012-07-23 16:22, Tobias Heister wrote: >> The document about scaling with labeled bgp [2] has a section about 6PE but >> it does not help much. First of all the method explained to get interface >> routes to inet6.3 does not work (at >> least on 10.4R9 but I figured out the correct way myself) and then when I >> try to follow the instructions and assign a ipv6 loopback manually and try >> to advertise it via family inet6 >> labeled-unicast rib inet6.3 I get the following commit error: "BGP: ribgroup >> inet6.3 is not defined for this address family and nlri" > > Have you tried to configure a named rib-group where you specify inet6.3 as an > import RIB?
If I understood you correctly you want me to do something like this: show routing-options rib-groups 6PE import-rib inet6.3; show protocols bgp group XXX family inet6 labeled-unicast { rib-group 6PE; explicit-null; } Unfortunately this gives a similar error: "BGP: ribgroup 6PE: inet6.3 not a valid primary rib for this nlri." What is funny too is that the document about scaling with labeled bgp [1] does not mention the explicit-null parameter in the family inet6- labeled-unicast. But when removing it the router says: "Missing mandatory statement: 'explicit-null'" Also it states the parameter under labeled-unicast is rib and not rib-group I am starting to believe that this guide is for different JunOS Version where they have changed the syntax and behaviour. [1] http://www.juniper.net/us/en/local/pdf/design-guides/8020013-en.pdf regards Tobias _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp