I run this exact config with two MX5 routers… they are solid.
On Tue, Nov 26, 2013 at 8:21 AM, Jason Warren <tikit...@yahoo.com> wrote: > I am looking for some advise. I am looking at picking up two Juniper MX5's > to replace a Cisco 7206 Router that is acting as a BGP router. I am wanting > to run the Juniper's in as much of a HA or failover as can be. I have two > BGP connections to the outside world. My thought process so far is to > terminate one upstream BGP connection into each MX5. Then I was thinking of > running a physical link between the two MX5s and run a iBGP session . Then > coming off each MX5 would be a VRRP instance that would connect to the rest > of my network. This would allow all of my network to only know one default > gateway but hopefully allow the MX5's the capability of fully utilize both > upstream connections. Is there a better way or any 'gotchas' that comes to > mind with the above? > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp