So, this is going to be a very priviledged post, and I have been
spending the last several months mulling over even complaining about it
either on here, or with my SE.
But a community friend sent me the exact same annoyance he is having
with Junos 21 or later, which has given me a final reason to just go
ahead and moan about it:
tinka@router> show rout
^
'rout' is ambiguous.
Possible completions:
route Show routing table information
routing Show routing information
{master}
tinka@router>
I'm going to send this to my Juniper SE and AM. Not sure what they'll
make of it, as it is a rather priviledged complaint - but in truth, it
does make working with Junos on a fairly historically commonly used
command rather cumbersome, and annoying.
The smile that comes to my face when I touch a box running Junos 20 or
earlier and run this specific command, is unconscionably satisfying :-).
Mark.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp