Joe
My dimensions are 132.5 and 26.5. With the o235, I wish I didn't move the 
firewall fwd. after a redo with the engine mount, all is well. 
Roger Baalman
Rbaalman at cox.net

Sent from my iPhone

> On Mar 11, 2016, at 6:22 PM, n357cj via KRnet <krnet at list.krnet.org> wrote:
> 
> Hey guys,
> just poking around again to see if I can get any more fuselage dimensions as 
> requested in the post below. I only have about 12 right now and that does not 
> get a very good data base going. It is a bit warmer now in most parts so take 
> a tape measure with you to the hanger and do the best you can even it is just 
> to the closest inch.
> Thanks,
> Joe Horton
> 
> ----- Forwarded Message ----
> Subject: Re: KR>  fuselage lengths
> 
> Morning Folks, 
>    I would like some more dimensions for the length of existing KR2 and KR2S 
> fuselages, (foreword face of main spar to back side of firewall and foreword 
> face of main spar to the intersection point of the tail post to fuselage 
> bottom) I have about 10 so far but I would like to get 3 or 4 times that many 
> to have a decent data base. ( I would like to hear from more of the overseas 
> guys... 
>   
> 
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> options

Reply via email to