The props in the Prop Band are a Prince 52x50 and a Rehm 52x48 and both are
drilled for VW.

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Charles Buddy & Cheryl Midkiff
Sent: Friday, December 17, 2004 10:44 AM
To: KRnet
Subject: Re: KR> Props


Mark,
If you find someone who will drill those for you, I'd like to know as I have

checked with a couple prop makers and they would not do it for me. I talked 
personally with Ed Sturba, and he said he'd only double drill props he had 
made. I also checked with Ted Hendrickson, here locally and he said he is 
fully retired. The people he sold his business to back east folded. The prop

I have is a 52 x 50 Hendrickson drilled for SAE 1. I was going to initially 
try to use this one on the Type 4 engine I have, but Ideally will probably 
be better off with a 52 x 54 drilled for VW. Mark are the props you have 
listed on your web site. I might just order a new prop from Ed and then make

this SAE one I have available for loaning if I can't get it drilled.
Bud Midkiff
Lynnwood, WA
email: [email protected]

----- Original Message ----- 
From: "Mark Jones" <[email protected]>
To: "CorvAircraft (E-mail)" <[email protected]>; "KR Net (E-mail)" 
<[email protected]>
Sent: Friday, December 17, 2004 7:31 AM
Subject: KR> Props


>I have a couple of VW props that I was thinking about having SAE-1 bolt
> pattern drilled into them. This would allow us to test the prop on both VW
> and Corvair. What are your thoughts on having two bolt patterns on the 
> same
> prop?
>
> Mark Jones (N886MJ)
> Wales, WI
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to [email protected]
>
> please see other KRnet info at http://www.krnet.org/info.html
> 



_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to [email protected]

please see other KRnet info at http://www.krnet.org/info.html

Reply via email to