Give les Palmer a call. I know he has the patterns. He also has a very large prop carving machine if anyone wants a prop coppied. His # is 972-241-4387 ----- Original Message ----- From: "Mark Jones" <mjo...@muellersales.com> To: "'KRnet'" <kr...@mylist.net> Sent: Friday, December 17, 2004 10:34 AM Subject: RE: KR> Props
> > Does anyone know of someone who will drill the SAE-1 pattern. > > Mark Jones (N886MJ) > Wales, WI > > -----Original Message----- > From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On > Behalf Of Orma > Hello Mark > > The thought of having dual usage for props in the bank is a great > suggestion. In a recent discussion about that same subject, Sterba was > quoted as saying "He would add the second pattern to his props, but not to > other manufacturers props" Liability was the issue. Having said that, he > must agree that it can be done. The only question that I could even dream > up is whether it matters how thin or thick the hub area of the prop is, > and > if for example it would not be recommended for a prop with a hub of less > then X inches. > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html >