The secret is to be sure to have a load in your memory SAVED. You must READ the cabinet first and SAVE that configuration. I do 2 copies and use one as a working copy and the other for restoral if needed. I make my changes then upload. It works just fine. There really is nothing other than using a 171 card to provide call ID. I am wondering if there is something in the 900 area to turn on CID to SLT sets though. Brad
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bob Puff Sent: Saturday, June 02, 2012 8:57 PM To: Panasonic KX-T telephone system discussion list Subject: Re: KX-T: KX-TD171 & TD1232 W/DUAL CABINETS - NOT ABLE TO USESLTCID FEATURE I can second that. I used the Programmator on a system that got all kinds of funky. I used the Panasonic one to read the config, did a total reset of the KSU, and used the Panasonic tool to load it back in. Problems solved. I've never used that other one since! Bob ---------- Original Message ----------- From: Charles Patterson <[email protected]> To: Panasonic KX-T telephone system discussion list <[email protected]> Sent: Sat, 2 Jun 2012 20:35:51 -0400 Subject: Re: KX-T: KX-TD171 & TD1232 W/DUAL CABINETS - NOT ABLE TO USE SLTCID FEATURE > > Okay, so if I'm understanding this correctly, the issue is not the phone > > system programming, it's the software I'm using to program it? > > No John, I think they were having a different discussion, that is, > unless you are also using the Russian Programmator. > > The Programmator always seems to work fine for basic systems, but > I've seen it mess up more complex systems, probably some features > they didn't have in their systems for testing. > > Charles Patterson > [email protected] > Patterson Communications, Inc. > Tarrytown, NY > 914-366-0291 ext.101 > > On Sat, Jun 2, 2012 at 7:53 PM, John Burk <[email protected]> wrote: > > Okay, so if I'm understanding this correctly, the issue is not the phone > > system programming, it's the software I'm using to program it? > > > > > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] On Behalf Of > > Brad Allen > > Sent: Saturday, June 02, 2012 3:47 PM > > To: 'Panasonic KX-T telephone system discussion list' > > Subject: Re: KX-T: KX-TD171 & TD1232 W/DUAL CABINETS - NOT ABLE TO USESLTCID > > FEATURE > > > > The guy who wrote the program has none little with it since a -6 came out. > > You may want to run windows 7 in XP mode and it will probably work then for > > you. I keep a win98 laptop, an old DELL 7000. It works, batteries are cheap, > > easy to have around. Brad > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] On Behalf Of > > Don Resor > > Sent: Saturday, June 02, 2012 4:12 PM > > To: Panasonic KX-T telephone system discussion list > > Subject: Re: KX-T: KX-TD171 & TD1232 W/DUAL CABINETS - NOT ABLE TO USE > > SLTCID FEATURE > > > > It might work with 7 if you have the extra 500gig package installed for > > "retro" XP programs. > > http://www.microsoft.com/windows/virtual-pc/ > > > > At 10:39 AM 6/2/2012, you wrote: > >>I have used the Russian kxtd programator for many years. Always works > >>great. It wont do Win. 7 but sure works good on XP. > >> > >>-------------------------------------------------- > >>From: "Charles Patterson" <[email protected]> > >>Sent: Saturday, June 02, 2012 11:46 AM > >>To: "John Burk" <[email protected]> > >>Cc: "Panasonic KX-T telephone system discussion list" <[email protected]> > >>Subject: Re: KX-T: KX-TD171 & TD1232 W/DUAL CABINETS - NOT ABLE TO USE > >>SLTCID FEATURE > >> > >>>That's a tough one. > >>>I've never used the TD171 card. > >>> > >>>The work around I would do only helps if they only need caller id in > >>>one or two locations and one or two lines- that is wire a jack > >>>directly to the co lines in parallel with the ksu, then you can plug > >>>in a standard cid box to catch those lines. I do that at home and put > >>>a giant display cid box on the kitchen wall. Since you say it's a > >>>dual cabinet, chances are they want it on multiple lines and multiple > >>>extensions though. > >>> > >>> > >>>sorry I can't say much more than that > >>> > >>>Charles > > > > > > > > _________________________________________________________________ > > KX-T Mailing list --- http://kxthelp.com/ > > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt ------- End of Original Message ------- _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
