Mike, The three pin jumper is for master slave settings for IDE(at least on the my modules it is).
I don't see anything about writeprotect on the module. I will check the manuals asap. Stefaan > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Mike Noyes > Sent: donderdag 7 februari 2002 15:31 > To: Stefaan Van Dooren > Cc: [EMAIL PROTECTED] > Subject: RE: [Leaf-devel] CF (write protect) + IDE adapter > > > > At 2002-02-07 09:35 +0100, Stefaan Van Dooren wrote: > > > Apacer is making a ATA-Disk Module (ADM) too. > > > > > > http://www.apacer.com/product/flash/f_adc.htm > > > > > > >These are working great (have several of them running), but they > >don't have writeprotect switch, jumper. > > Stefaan, > This particular model does. Note: there is a three pin jumper at > the top of > the ATA-Disk Module, and the text below the image states: > > Extended Data Protection and Security > WP# pin for data protection > > If I'm wrong please correct me. Thanks. > > -- > Mike Noyes <[EMAIL PROTECTED]> > http://sourceforge.net/users/mhnoyes/ > http://leaf.sourceforge.net/content.php?menu=1000&page_id=4 > > > _______________________________________________ > Leaf-devel mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-devel > _______________________________________________ Leaf-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-devel