At 2002-02-18 05:21 -0800, Mike Noyes wrote: >I have a meeting this week with SST distributor Symmetry Electronics. They >are providing me with a 8MB unit, so my father can try to create a >jumper/switch that enables/disables WP. > >The people at SST have indicated that WP is possible. It looks like the >Apacer representative below is saying the same thing. A hardware change is >needed. Specifically, creation of a jumper that connects pin 62 of the >LD017 controller chip to ground is needed to use WP.
Everyone, I just acquired an 8MB ADM (SST58SM008-70-C-FSI). There are two solder points at the top of the module labeled R8. They appear to be too close together to allow for a jumper, but a remote switch configuration may work. -- Mike Noyes <[EMAIL PROTECTED]> http://sourceforge.net/users/mhnoyes/ http://leaf.sourceforge.net/content.php?menu=1000&page_id=4 _______________________________________________ Leaf-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-devel
