I have a 3ComImpactIQ connected to a Linux Router
on the serial port.
I configured the 3Com on a Win box and that went smoothly.
After much tinkering with ppp/chat scripts I finally got a connection
connected ppp0 <-> ttyS0.
Then I got some errors, something about serial link 7 bit last bit
all 0's, then a disconnect. The ISP says he did not see login so
I guess it did not get that far.
This is strange. stty reveals that it appears that pppd puts the
port in raw mode, cs8 -parenb, and 115000 bps.
I can't believe the modem would be 7bit, there's no config option
or documented jumpers. ???????
For grins I added passive to the options. Then I got some error
indicating a problem with LCP. But the connection stays up.
Now ip addr/ifconfig reveals a ppp0 link but with no address.
I am pretty sure the addr and route are taken care of by
/etc/ppp/ip-up. But I don't believe that script is running.
I put in a echo $* > /tmp/ip-up and got no file.
Perhaps if LCP did not occur, pppd did not run ip-up?
Any help appreciated. Thanks.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
