[leaf-user] Dachstein Help....

[Michael McClure]

I want to have only 1 card (eth0) in my Dachstein box and have it connect to my internal network (which, as a side note, has an eigerstein firewall w/eth1=192.168.1.254).

I've commented out the eth1 entries and set my IF_AUTO to eth0. I've put 192.168.1.100 into my eth0 ip w/a netmask of 24, broadcast to 192.168.1.255 and gateway to be 192.168.1.254 (my eigerstein eth1). I've changed IPFILTER_SWITCH=none.

I can ping 127.0.0.1, but not 192.168.1.100 or 254. The ping says the target network is unreachable.
What else should I do to the default 1680K Dachstein disk image network.conf to make it be a 1 interface client on my internal network? The goal is to have it serve SSHD 2.0 and have the SSH and FTP clients on it (my firewall doesn't). I want to be able to ssh through my firewall to this internal box and SSH out from there onto the internet. I'll also probably run SAMBA on it and put in a couple of hard disk drives so I can also use it as a fileserver.

TIA.
mike.



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html