Maybe you need to tell it the IRQ explicitly. Also make sure there is no confilict using diagnostics DOS 3COM prog. On my Bering systems (2.4.20 kernel), here is what I have:
# ISA ethernet cards #3c509 - eth0 3c509 irq=5 And that was also same when the system was in Daschstein. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 10, 2003 11:37 AM Subject: [leaf-user] Drivers for 3C509B > I posted a few weeks ago about a problem I was having getting Bering to recognize my NICs. I was using the wrong module! (stupid me.. ) Anyway, I loaded the 3c509.o module from Jacqes site using the 2.4.20 version and am still having trouble. Are there any oher needed modules? Both NICs are ISA and I've configured them using the DOS config progam from 3Com. Is there any thing I'm missing? When I try to insmod I am getting an error message. If I input ip addr show I only get back feedback for my loopback and dummy device. Your input is appreciated. > > > > > > ------------------------------------------------------- > This SF.NET email is sponsored by: > SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! > http://www.vasoftware.com > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html > ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html