Hi. You should use i486 image. Geode is for Geode LX (which is something between i586 and i686).
07.04.2016 21:02, Bob von Knobloch пишет: > Hi again, > > Some troubles getting Bering 5.2.4. > Firstly, I was unable to copy the LEAF files to my CF. > Linux sees it as too small for some reason and stops copying after about > 80 MByte (although it shows a 256MByte partition). > Using a USB2 card reader and a windows XP VM under VirtualBox, I was > able to copy the Bering 5.2.4 files. > Attempting to boot, the box displays the usual WRAP messages, then the > Bering 'shield' and then issues the following on the serial port: > > This kernel requires the following features not present on the CPU: > 3dnow > Unable to boot - please use a kernel appropriate for your CPU. > > I used the "Bering-uClibc_5.2.4_geode_syslinux_serial115200.tar.gz" file > from Sourceforge. Is this not the right image for a PC Engines geode > WRAP board? > > Cheers, > > Bob > > The Sun is out, the sky is blue, it's time to drive the MR2. > > ------------------------------------------------------------------------------ > ------------------------------------------------------------------------ > leaf-user mailing list: leaf-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/leaf-user > Support Request -- http://leaf-project.org/ ------------------------------------------------------------------------------ ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/