Just tell me the size you want and I will make them. It's well within my realm. Keep in mind the added stock required to make the pilaster when figuring out the width of the dogs. It might interfere with something on the mill.
Just a quick gestimate, your 11" diameter would need a 7-3/4" square and your stock would be 1-5/8" thick to make it happen. Also, double check your numbers on the 900, it should only swing 9 inches on a stand in the stock form. The slots in the legs limits the diameter. If it's on a bench it's only 8" as the stock would hit the bench. I'm going to be doing a batch of laser parts Monday so now is a really good time to sneak something simple like this in. -Tim ----- Original Message ----- From: "Begat" <bega...@gmail.com> To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com> Sent: Friday, February 10, 2012 5:07 PM Subject: What the World Needs Now: TK Extra Large Pilaster Dogs > Hello All, > > The largest diameter pilaster dog that Legacy sells mounts wood 4 > inches wide. Now I'm aware that I could make my own wooden dogs, > etc. But my 900 swings 10inches and I have a Legacy CNC that swings > 11. Is there a reason why there are not pilaster dogs that match the > swing diameters. Am I alone in wanting them? Can you not see the > commercial possibilities?! > > This would be good for both the ornamental mill and the cnc crowd. And > by the way, Legacy does not advertize it well, but they make CNC > machines with a 15" swing capacity. Imagine those dogs!!!! > > Tim, Go to the Dogs!!! > > Begat > > -- > You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. > To post to this group, send email to legacy-ornamental-mills@googlegroups.com. > To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.