I see point taken I have never done that many of anything yet, 6 is the most
I have made of something
Bill
----- Original Message -----
From: "Begat" <bega...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Saturday, February 11, 2012 2:02 PM
Subject: Re: What the World Needs Now: TK Extra Large Pilaster Dogs
Bill,
Yes, pilaster dogs could be made of wood, especially if you were only
trying to make a few parts. But if you're trying to make lots of
them, then screwing the parts to the same wooden blocks won't do for
long. Today I was using the dogs to make some pickets for a fence
project. I started by saying that purchasing the dogs when I bought
the 900 was a mistake. 20 pickets into the project I realized that I
would probably be making new wooden dogs. Imagine all the enlarged
holes in the dogs.
Begat
On Feb 10, 9:52 pm, "Bill Bulkeley" <bulke...@mmnet.com.au> wrote:
couldn't you make plaster mounting dogs your self out of blocks of wood ?
what am I missing here please explain
Bill
----- Original Message -----
From: "Tim Krause" <artmarb...@comcast.net>
To: <legacy-ornamental-mills@googlegroups.com>
Sent: Saturday, February 11, 2012 12:56 PM
Subject: Re: What the World Needs Now: TK Extra Large Pilaster Dogs
> Just tell me the size you want and I will make them. It's well within my
> realm. Keep in mind the added stock required to make the pilaster when
> figuring out the width of the dogs. It might interfere with something on
> the mill.
> Just a quick gestimate, your 11" diameter would need a 7-3/4" square and
> your stock would be 1-5/8" thick to make it happen. Also, double check
> your
> numbers on the 900, it should only swing 9 inches on a stand in the
> stock
> form. The slots in the legs limits the diameter. If it's on a bench it's
> only 8" as the stock would hit the bench.
> I'm going to be doing a batch of laser parts Monday so now is a really
> good
> time to sneak something simple like this in.
> -Tim
> ----- Original Message -----
> From: "Begat" <bega...@gmail.com>
> To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
> Sent: Friday, February 10, 2012 5:07 PM
> Subject: What the World Needs Now: TK Extra Large Pilaster Dogs
>> Hello All,
>> The largest diameter pilaster dog that Legacy sells mounts wood 4
>> inches wide. Now I'm aware that I could make my own wooden dogs,
>> etc. But my 900 swings 10inches and I have a Legacy CNC that swings
>> 11. Is there a reason why there are not pilaster dogs that match the
>> swing diameters. Am I alone in wanting them? Can you not see the
>> commercial possibilities?!
>> This would be good for both the ornamental mill and the cnc crowd. And
>> by the way, Legacy does not advertize it well, but they make CNC
>> machines with a 15" swing capacity. Imagine those dogs!!!!
>> Tim, Go to the Dogs!!!
>> Begat
>> --
>> You received this message because you are subscribed to the Google
>> Groups
> "Legacy Ornamental Mills" group.
>> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
>> To unsubscribe from this group, send email to
> legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> For more options, visit this group at
>http://groups.google.com/group/legacy-ornamental-mills?hl=en.
> --
> You received this message because you are subscribed to the Google
> Groups
> "Legacy Ornamental Mills" group.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> To unsubscribe from this group, send email to
> legacy-ornamental-mills+unsubscr...@googlegroups.com.
> For more options, visit this group at
>http://groups.google.com/group/legacy-ornamental-mills?hl=en.
> -----
> No virus found in this message.
> Checked by AVG -www.avg.com
> Version: 2012.0.1913 / Virus Database: 2112/4801 - Release Date:
> 02/10/12
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2112/4802 - Release Date: 02/10/12
--
You received this message because you are subscribed to the Google Groups "Legacy
Ornamental Mills" group.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.