Here is a video of something like what Im talking about. C.A.G. https://www.youtube.com/watch?v=eUmhNGH99sc
----- Original Message ----- From: "CURTIS GEORGE" <[email protected]> To: [email protected] Sent: Saturday, October 11, 2014 6:09:34 PM Subject: Re: NEW Project - Old Subject? Using LOM for large diameter tables-platters Hello Milt what I would do it mount 2 pieces of wood on the edges of your slabs (2x4's would work well) and then use those wood pieces to mount onto the Legacy's lower rails,Clamp the wood/slabs on to the rails and then you can run the mill over the surface and once the section has been cleaned up move the wood along the rails until until you have cleaned up the hole slab.Your Z axis should have no problems with the reach, and the a surface planing bit is all that you really need to do this job. C.A.G. ----- Original Message ----- From: "Milt on Gmail" <[email protected]> To: [email protected] Cc: "Milt on Gmail" <[email protected]> Sent: Saturday, October 11, 2014 4:41:51 PM Subject: NEW Project - Old Subject? Using LOM for large diameter tables-platters I have several large English and Black Walnut slabs that I would like to reduce to tables and large format furniture items and I would like to poll the group on a project that I am working on to flatten these slabs (photo attached). As an example this slab is a full three inches thick and measures at the max 72” for corner to corner and 40 “ wide. Due to its size, I do not want to use a hand plane to surface the slab and, therefore was thinking of using LOM to do the job. Anyone have suggestions. I am presently using an 1800 with Z axis, and with motor drive on X axis. I have the circular table accessory however it is a bit out small for this project. Your input and experience would desire. Thanks Milt Lebanon, Oregon -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] . To post to this group, send email to [email protected] . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] . To post to this group, send email to [email protected] . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
