Hello and Good morning to all.
Richard, I like and do use your idea, of sorts. I have done the sharpy marker
in my router chuck idea, But what I like to do more is, I take a large spindle
and turn it, using light cuts with the router bit, If the cut dose not look
good when finished, I just turn the spindle round again and then try another
pattern on the same spindle. In my scrap bins I have lots of spindles that
started out as 3" and 4" and are now something close to 3/4" to 1" before I
stop using them.
Your second message . on the piston rod being to short? If you can take some
pictures of the part, perhaps we could figure out how to make a new one of you?
Have a Great day.
Talk to you more latter.
C.A.G. On Saturday, August 24, 2019, 06:00:06 AM EDT, Richard Ellis
<rchrd.ell...@gmail.com> wrote:
Hi Curt My TK 'S piston rod is not long enough to make the waves more stormy
when using the 2X gear. Another alteration to do.!!Richard
On Saturday, August 24, 2019 at 5:14:29 AM UTC+1, Curt George wrote:
Hello RonThank you. Burnie and I had many conversions over the years, ( I do
miss him.) I have not had the pleasure of knowing Mr. Gold. (But I know Tim
would very much like to see that VB script you were talking about. ) The CNC
world is something right out of the Si-Fi comic books. Amazing stuff. and way
beyond my comprehension at this time.
Since you own a 1000 ex. I can explain how I made my Wave attachment, (with
pictures) If you want to make your own attachment for your Legacy. Its pretty
easy to do. Plus as I already stated, the cutting method is unique.Have a good
night.
C.A.G..
On Friday, August 23, 2019, 03:28:33 PM EDT, 'Ronald Kirchoff' via Legacy
Ornamental Mills <legacy-orna...@ googlegroups.com> wrote:
Hi CurSoftware has been developed to produce sign waves on a circular column.
This software was developed by Mr. Gold in North Carolina. I don't recall his
first name. He worked with Bernie modifying his Legacy with roller bearings on
each axis to improve carriage movement. He also helped Bernie in upgrading his
Legacy to CNC. Bernie was a member and he passed away a few years ago. Mr Gold
sent me a picture of a column where sine wave was cut on a CNC machine using
his software. I produced a report a few years ago that provides the equations
and software code for the generation of sine waves, half circle, ellipticle,
zig zag or triangle and square wave patterns on circular, multisided or tapered
columns. I refer to wave forms along the column as strings of pearls. I also
produced modifications to the equations and software to provide the same
waveforms around either end or both ends of the column which I refer to as
bracelets. I also provide equations and software for spirals wave forms. I also
have an approach for curvilinear waveforms for the rotary table. All these are
for CNC machines. The software is in VB script. I don't have CNC machine. My
Legacy is the 1000ex. I don't have the capability to compile the VB script to
produce the required G code. I put the report on the shelf about 6 years ago. I
haven't yet but I will send a copy of the curvilinear wave report to Tim. We
work together on wave form generations using the rotory table.
Regards,
Ron K
From: 'Curt George' via Legacy Ornamental Mills <legacy-orna...@
googlegroups.com>
To: legacy-ornamental-mills <legacy-orna...@ googlegroups.com>
Sent: Fri, Aug 23, 2019 8:53 am
Subject: Re: TK Reciprocater long curves
Keep on working with it Richard, you are doing a good job!
The wave attachment, is something that is uniquely OURS, that is the LOM
group's, No one else can easily make the same type of designs,
Ive had wood turners ask me how I made that? even Guys with OT machines can not
do a wave, THAT is Cool (in my book/ a feather in my cap, so to speak !) ;-)
Have a GREAT DAY.
C.A.G.
On Friday, August 23, 2019, 04:53:09 AM EDT, Richard Ellis
<rchrd...@gmail.com> wrote:
Hi CurtI am nearly sure how I did it,, but will make sure later today. It
certainly wasn't just by moving one hole on/in the 40 hole alloy plate.Richard
On Thursday, August 22, 2019 at 1:25:22 PM UTC+1, Curt George wrote:
RichardI like it, I hope you are able to repeat the process again? that is a
neat cut!
C.A.G.
On Thursday, August 22, 2019, 07:15:38 AM EDT, Richard Ellis
<rchrd...@gmail.com> wrote:
Well Tim you are rightWhat I did was to keep my finger in place on the pin of
the TK ( pressing gently in one direction )The cut was done, by putting the
pin in the next hole to where it should have been.. I:E I made it make a
mistake like I did. All trial and error on my part. The question is ---shall I
be able to do it again ??Richard
On Thursday, August 22, 2019 at 11:44:06 AM UTC+1, Tim wrote:
That's something I have not seen. You might want to add a light return spring
to prevent any loss of time issues in the extended sine wave.
Sent from Samsung tablet
-------- Original message --------From: Richard Ellis <rchrd...@gmail.com>
Date: 8/22/19 3:16 AM (GMT-08:00) To: Legacy Ornamental Mills <legacy-orna...@
googlegroups.com> Subject: Re: TK Reciprocater long curves
Tim & othersHere are a couple of pics of the same bit of wood.Richard
On Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:
Thanks for the info Curt & Bill I have printed it of to study and then it will
go into my folder for other s who end up with my RevoRichard
On Sunday, August 18, 2019 at 10:46:40 AM UTC+1, Richard Ellis wrote:
Hi all you LOM expertsI am trying to do a long (approx ) 6 inch flute with the
TK at present with the standard index gear I get a 2 inch point to point curve
If I change to the 2X gear I think it will only give me a four inch point to
point --- I have not tried but it's my guess !!Am I trying to do the
impossible???Richard
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 58a54418-8c91-4041-841b-
92cf15c106f1%40googlegroups. com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 0a70efeb-04b4-4766-b093-
91238c058645%40googlegroups. com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 3aaab4ba-42b5-4616-bfb3-
51369e2a304c%40googlegroups. com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 2126396986.853782.
1566564821968%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 118805103.2077930.
1566588509696%40mail.yahoo.com .
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/e59f8182-0699-4171-bd2c-9c7d1245df8c%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/465628224.1128063.1566658553810%40mail.yahoo.com.
