Have to do a little digging around maybe it's readily available here too not sure. Yes the material legacy uses is outstanding. I do have a couple spares when I first bought our LOM 1200 a couple years ago. I just think it would be fun to mill the shape on the legacy and drill and tap from there.
Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Oct 2, 2020 at 8:07 PM <bulke...@mmnet.com.au> wrote: > The metal lathes with brass nuts use to last 20 or 30 years before a > replacement nut needed to be made and longer for the lead screw that will > do me. but it was just a thought just keep making Delrin nuts is my way of > thinking. > > > > Bill > > > > *From:* finunlim via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Saturday, 3 October 2020 10:50 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: leadscrew tap > > > > Some info on this subject... I made my own tap from a left over piece of > acme threaded rod I had from one of my Legacy mods... very simple to do... > approximately 4-5 inches long, I tapered the end much like a starting tap > would be tapered, cut a single flute to do the cutting of the thread and it > worked very well in some black Teflon-like material I got from > McMaster-Carr... the material was very inexpensive... I don’t understand > why to make the nut out of wood... in my opinion, the wood will not last as > long as the Teflon would... and brass is not a viable substitute, IMHO... > need to be very careful not to wear out the lead screw, as that is not so > easy to replace... better to wear out the nut than the lead screw... the > black plastic material is very well suited for the job and is not > expensive... just my two cents on the subject... and this was posted by me > a while ago... perhaps two to three years ago... Joe B. > > Sent from my iPhone > > > > On Oct 2, 2020, at 8:31 PM, Ken Fisher <kfishe...@outlook.com> wrote: > > > > HDPE is a high density polyethylene product that comes in various sheet > sizes as well as blocks and rounds. I don't know about self healing but is > easy to machine and offers very little friction. I think another good > alternative would be phenolic. Also comes in various sizes including round > stock. > > > > Ken > > > ------------------------------ > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> on behalf of M.W.Foscue < > mwfos...@earthlink.net> > *Sent:* Friday, October 2, 2020 5:01 PM > *To:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> > *Subject:* Re: leadscrew tap > > > > Tim, > > The only "self-healing" stuff I have experience with is called "Silly > Putty"! LoL > > What you may be referring to is UHMW Plastic. Attached is a screen grab > of a piece about the size you might be wanting. > > It is from Grainger's website. > > Mac > ------------------------------ > ------------------------------ > > -----Original Message----- > From: Tim Ziegler > Sent: Oct 2, 2020 7:26 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: leadscrew tap > > I would like to try that hard white plastic.that is suppose to be self > healing HD????? someone help me here cant remember what is called > > We used it a lot for hold downs fences etc... at WoodCraft Industries. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > ------------------------------ > ------------------------------ > > > > On Fri, Oct 2, 2020 at 5:04 PM <bulke...@mmnet.com.au> wrote: > > I myself might try a brass leadscrew nut. On all the old metal lathes the > nut was brass, lubrication will be the only problem if anything but with > the new dry lubricants these days like dyna-glide this might not be a > problem. As for a wooden nut a really hard wood that is a little oily might > be the go purple heart or rose wood comes to mind > > > > Bill > ------------------------------ > ------------------------------ > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue > *Sent:* Saturday, 3 October 2020 1:10 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: leadscrew tap > > > > Tim & others, > > > > Let's hear it for "Do it yourselfers!" > > > > Has anyone ever made lead screw blocks out of wood? > > If so - what were the results? > > I know they made "bearings" for ships > <https://en.wikipedia.org/wiki/Lignum_vitae> out of Lignum Vitae - so > I'll assume one of The Group members has used wood for a screw block. > > I'm sure the type & quality of the species you choose will have a > "bearing" () on how it performs. > > Just a thought. > > > > Tim - let us know how your "soon to be fabricated" Lignum Vitae screw > blocks turn out. > > > > Get Happy! > > Mac > ------------------------------ > ------------------------------ > > -----Original Message----- > From: Tim Ziegler > Sent: Oct 2, 2020 9:41 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: leadscrew tap > > I very much respect your opinion Bill so thanks for the additional feed > back. > > I tend to be pretty much a total do it your selver and having that tap on > hand would be a huge benefit.. > > So with that thank you kind Sir. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > ------------------------------ > ------------------------------ > > > > On Fri, Oct 2, 2020 at 7:38 AM <bulke...@mmnet.com.au> wrote: > > Well considering it will be only cutting Delrin I should think it would be > ok I use Chinese high speed steel in my metal lathe and in my shaper and it > cuts brass, aluminium and mild steel as well as any other HSS tool. I also > have a set of Chinese tap and dies that work fine. remember the alternative > for a 5/8 x 4 acme tap Is custom made at around $300 to me it is worth > trying. that’s why I bought one I will tap a piece of Delrin when I get the > chance and see but I’m sure it will work ok. > > Just my opinion of course > > > > Bill > ------------------------------ > ------------------------------ > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Friday, 2 October 2020 8:42 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: leadscrew tap > > > > Thanks Bill, > > > > looks like a reasonable price. > > how does the quality appear to you? > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > ------------------------------ > ------------------------------ > > > > On Fri, Oct 2, 2020 at 1:41 AM <bulke...@mmnet.com.au> wrote: > > Any of you guys looking for a acme tap to make your own leadscrew nuts? > Well I found this a few weeks back and bought one it arrived today > > Seems to fit the Delrin nut perfectly. This could be extremely handy if > you can’t buy any replacement leadscrew nuts. > > > > > https://www.ebay.com/itm/1pc-ACME-5-8-4-HSS-Right-Hand-ACME-Thread-tap/254618553544?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 > > > > the listing is for 2 but I have seen it sell out and restock twice since I > bought mine so every one should be ok to get one. I wanted the make sure it > was the right thread before I let you all know about it. > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/762693774.8141.1601683277120%40wamui-charming.atl.sa.earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/762693774.8141.1601683277120%40wamui-charming.atl.sa.earthlink.net?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/MWHPR13MB1517026BE7C0935FD69700BCB30E0%40MWHPR13MB1517.namprd13.prod.outlook.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/MWHPR13MB1517026BE7C0935FD69700BCB30E0%40MWHPR13MB1517.namprd13.prod.outlook.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4CB7ED69-8225-4048-B3F9-D0DDFFB70AC2%40aol.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/4CB7ED69-8225-4048-B3F9-D0DDFFB70AC2%40aol.com?utm_medium=email&utm_source=footer> > . > > > ------------------------------ > [image: Avast logo] <https://www.avast.com/antivirus> > > This email has been checked for viruses by Avast antivirus software. > www.avast.com <https://www.avast.com/antivirus> > > <#m_7837609176065023969_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d69921%249ea9b1a0%24dbfd14e0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d69921%249ea9b1a0%24dbfd14e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLELhJUbWy3D43Arh0TkWyo8bQu14AEGh5GJj5sexjaoCg%40mail.gmail.com.