Yes and welcome to the group Shuai, We are happy to have you on board with us. Extremely great post on the Slipit. product too.
Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jan 25, 2022 at 10:53 PM Shuai Robert <robertsh...@gmail.com> wrote: > Hello guys, > > I have used the Slip-it > https://www.slipit.com/all-products/sf-sliding-compound/index.html for > hand-planes on wood, also on hand saw and jig saw blades to reduce friction. > > > > It is non toxic paste with a little bit of liquid oil and becomes softer > with temperature (soft year-round for So Cal weather). I can apply it with > cheap brushes and due to being silicone free it doesn't cause fish eye on > finishing > > Regardless don't put it on the piece you're cutting, just on metal tools > or wood on wood jigs. > > It does not dry or film, (note manufacture claims it attracts less dust - > due to paste wax sitting on top of oil), but as long as the gunk has a > place to go it wouldn't affect operation. > > > one quart lasts forever. you just dip a brush lightly on top of the soft > oily paste and apply liberally over surface of intended travel of your tool. > > > If it's possible to coat the rails with epoxy precisely that will be most > slide-y surface. > > > I have a legacy in the garage for few years now, bought for $300 cash > including the Porter Cable Router.. haven't got to using it yet. Slip-it is > what I would use on the metal contact points. > > > On Friday, January 21, 2022 at 5:49:37 AM UTC-8 timjz...@gmail.com wrote: > >> Good morning all, >> >> Checking to see where others are getting "Dynaglide". >> I have tried some different substitutes for this but have >> never really found one that works quite as well. >> Bostik Glidecoat being one I currently use as well as Dynaglide. >> I have used a couple other's from misc. suppliers but to no >> avail. >> So besides through Legacy I have found 2 other suppliers >> that carry it. One is out of stock with the promise is "more on it's way" >> Promised for at least 2 months now. >> The other store actually has it on hand. StewMac >> So Stores: >> LOM--- Price??? last I got was like $18.00 >> StewMac------ instock for $20.99 >> WoodWorker's Supply---- out of stock $23.59 >> >> >> https://www.stewmac.com/luthier-tools-and-supplies/supplies/cleaners-and-lubricants/sound-synergies-dynaglide-tool-conditioner >> >> >> https://woodworker.com/dynaglide-plus-lube-spray-cleaner-14-oz-mssu-171-203.asp >> >> I ordered 2 cans last night through StewMac. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/cc4fe01a-72b3-4c6d-bf3f-6b2a1485960dn%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/cc4fe01a-72b3-4c6d-bf3f-6b2a1485960dn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFPvELxSLtrSjMv0WL_Bb2UAjinHabV3ASkKjMiM7o1xQ%40mail.gmail.com.
