Date: Fri, 28 Sep 2001 18:40:55 -0400 From: "E. Smith" <[EMAIL PROTECTED]> Subject: Re: Got it1!
Yeah, mine was a real no-name (can't remenber the name right now). -e. ----- Original Message ----- From: "Jason Kim" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Friday, September 28, 2001 5:18 PM Subject: Re: Got it1! > Date: Fri, 28 Sep 2001 14:08:13 -0700 > From: "Jason Kim" <[EMAIL PROTECTED]> > Subject: Re: Got it1! > > Really? I have three cheap ones (3Com, Xircom, Linksys) and each of them are > well-supported by Linux (3c589, xirc2ps, and tulip, respectively). There are > many other chipsets that don't work too well, though, especially the unknown > ne2k/tulip-like chips, I think. > > I couldn't afford a PCMCIA CD-ROM, so I never got one. :( > > -Jason > > > ----- Original Message ----- > From: "E. Smith" <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Friday, September 28, 2001 2:02 PM > Subject: Re: Got it1! > > > > Date: Fri, 28 Sep 2001 16:42:30 -0400 > > From: "E. Smith" <[EMAIL PROTECTED]> > > Subject: Re: Got it1! > > > > Yeah, but I've had trouble in the past with PCMCIA network cards--mostly > > because at one point I only had one PCMCIA NIC and it was off-brand. > > > > -e. > > > > > > ----- Original Message ----- > > From: "Jason Kim" <[EMAIL PROTECTED]> > > To: "Libretto" <[EMAIL PROTECTED]> > > Sent: Friday, September 28, 2001 4:42 PM > > Subject: Re: Got it1! > > > > > > > Date: Fri, 28 Sep 2001 13:31:17 -0700 > > > From: "Jason Kim" <[EMAIL PROTECTED]> > > > Subject: Re: Got it1! > > > > > > In my opinion, the easiest (and best) installation a machine like a > > Libretto > > > is a net install (over your local network). I just used an FTP server > here > > > on my desktop to serve the files over 100BT to my Libretto ... very > quick > > > and easy, no drivers, no mess, no copying. :) > > > > > > -Jason > > > > > > > > > ----- Original Message ----- > > > From: "E. Smith" <[EMAIL PROTECTED]> > > > To: "Libretto" <[EMAIL PROTECTED]> > > > Sent: Friday, September 28, 2001 1:26 PM > > > Subject: Re: Got it1! > > > > > > > > > > Date: Fri, 28 Sep 2001 16:11:47 -0400 > > > > From: "E. Smith" <[EMAIL PROTECTED]> > > > > Subject: Re: Got it1! > > > > > > > > Yeah, case is not an issue. I'm careful about that. I don't think it > > > needed > > > > more of a device name because I got a different result when I > mispelled > > a > > > > directory name--indicating that it was finding my directory (and thus > > the > > > > device name was adequate) when I typed the directory name correctly. > > > > > > > > It's cool. I've got a new (used) Sony CD-ROM from which I just > completed > > > an > > > > install! Happy day! None of my CD-ROM drives in teh past (I've tried > > > three > > > > or four) would work--but that was also with different Linux distros. > > > > > > > > If I ever need to do this from a FAT16 again, I'll download or create > an > > > ISO > > > > image. THat may just undercut all this. > > > > > > > > Thanks a lot for your help. As soon as I get a few minutes, I'm going > to > > > set > > > > up X. Finally. Cripes. > > > > > > > > -e. > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Jason Kim" <[EMAIL PROTECTED]> > > > > To: "Libretto" <[EMAIL PROTECTED]> > > > > Sent: Friday, September 28, 2001 4:07 PM > > > > Subject: Re: Got it1! > > > > > > > > > > > > > Date: Fri, 28 Sep 2001 13:00:00 -0700 > > > > > From: "Jason Kim" <[EMAIL PROTECTED]> > > > > > Subject: Re: Got it1! > > > > > > > > > > Not only does case matter, I don't know about the 7.1 installer, but > > > > > previous versions asked for the directory that *contains* the redhat > > > > > directory, iirc. And when you specify a partition, wouldn't you need > > to > > > > > provide the entire device and partition (like /dev/sda4)? Again, I'm > > not > > > > > familiar with the 7.1 install, so I'm not of much help here, but I > > hope > > > > that > > > > > this proves useful. > > > > > > > > > > -Jason > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "David VanHorn" <[EMAIL PROTECTED]> > > > > > To: "Libretto" <[EMAIL PROTECTED]> > > > > > Sent: Friday, September 28, 2001 10:08 AM > > > > > Subject: Re: Got it1! > > > > > > > > > > > > > > > > Date: Fri, 28 Sep 2001 12:03:14 -0500 > > > > > > From: David VanHorn <[EMAIL PROTECTED]> > > > > > > Subject: Re: Got it1! > > > > > > > > > > > > At 09:43 AM 9/28/01 -0700, Eiren K. Smith wrote: > > > > > > >Date: Fri, 28 Sep 2001 12:29:53 -0400 > > > > > > >From: "Eiren K. Smith" <[EMAIL PROTECTED]> > > > > > > >Subject: Re: Got it1! > > > > > > > > > > > > > >Thanks, Jason. I've been trying that, but no joy. Is there a > > cylinder > > > > > limit > > > > > > >past which it will not look for the copied files? My D: partition > > > > (where > > > > > > >I've copied the CD files) follows a ~4GB C: partition. Could that > > be > > > > it? > > > > > > > > > > > > > >Also, what directory do I need to point to in the "Select > Parition" > > > > box? > > > > > > >I've tried "RedHat/", "" (no path specified), "RedHat/base/", and > > > > > > >"RedHat/RPMS/". I've also tried all these without the trailing > > slash. > > > > > Still > > > > > > >it says either ""Device /dev/hda5 does not appear to contain Red > > Hat > > > > > CDROM > > > > > > >images." and > > > > > > > if I type a directory name wrong, I get "Failed to read > directory > > > > > > >/tmp/hdimage/<whateverthewrongnameis>: No such file or > directory". > > > > > > > > > > > > > >Can you or anyone else lend some advice? > > > > > > > > > > > > Case matters. RedHat is not the same as redhat > > > > > > -- > > > > > > Dave's Engineering Page: http://www.dvanhorn.org > > > > > > > > > > > > Got a need to read Bar codes? http://www.barcodechip.com > > > > > > Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and > > Bookland, > > > > > with > > > > > > two or five digit supplemental codes, in an 8 pin chip, with NO > > > external > > > > > parts. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ************************************************************** > > > > > > http://libretto.basiclink.com - Libretto mailing list > > > > > > http://libretto.basiclink.com/archive - Archives > > > > > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > > > > > -------TO UNSUBSCRIBE------- > > > > > > Reply to any of the list messages. The reply mail should be > > > > > > addressed to: [EMAIL PROTECTED] - Then replace any text > > > > > > on the message's subject line: cmd:unsubscribe > > > > > > --------TO UNSUBSCRIBE DIGEST------ > > > > > > Do above but with this on subject line: cmd:unsubscribe digest > > > > > > ************************************************************** > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ************************************************************** > > > > > http://libretto.basiclink.com - Libretto mailing list > > > > > http://libretto.basiclink.com/archive - Archives > > > > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > > > > -------TO UNSUBSCRIBE------- > > > > > Reply to any of the list messages. The reply mail should be > > > > > addressed to: [EMAIL PROTECTED] - Then replace any text > > > > > on the message's subject line: cmd:unsubscribe > > > > > --------TO UNSUBSCRIBE DIGEST------ > > > > > Do above but with this on subject line: cmd:unsubscribe digest > > > > > ************************************************************** > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ************************************************************** > > > > http://libretto.basiclink.com - Libretto mailing list > > > > http://libretto.basiclink.com/archive - Archives > > > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > > > -------TO UNSUBSCRIBE------- > > > > Reply to any of the list messages. The reply mail should be > > > > addressed to: [EMAIL PROTECTED] - Then replace any text > > > > on the message's subject line: cmd:unsubscribe > > > > --------TO UNSUBSCRIBE DIGEST------ > > > > Do above but with this on subject line: cmd:unsubscribe digest > > > > ************************************************************** > > > > > > > > > > > > > > > > > > > ************************************************************** > > > http://libretto.basiclink.com - Libretto mailing list > > > http://libretto.basiclink.com/archive - Archives > > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > > -------TO UNSUBSCRIBE------- > > > Reply to any of the list messages. The reply mail should be > > > addressed to: [EMAIL PROTECTED] - Then replace any text > > > on the message's subject line: cmd:unsubscribe > > > --------TO UNSUBSCRIBE DIGEST------ > > > Do above but with this on subject line: cmd:unsubscribe digest > > > ************************************************************** > > > > > > > > > > > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
