Date: Fri, 28 Sep 2001 16:11:47 -0400 From: "E. Smith" <[EMAIL PROTECTED]> Subject: Re: Got it1!
Yeah, case is not an issue. I'm careful about that. I don't think it needed more of a device name because I got a different result when I mispelled a directory name--indicating that it was finding my directory (and thus the device name was adequate) when I typed the directory name correctly. It's cool. I've got a new (used) Sony CD-ROM from which I just completed an install! Happy day! None of my CD-ROM drives in teh past (I've tried three or four) would work--but that was also with different Linux distros. If I ever need to do this from a FAT16 again, I'll download or create an ISO image. THat may just undercut all this. Thanks a lot for your help. As soon as I get a few minutes, I'm going to set up X. Finally. Cripes. -e. ----- Original Message ----- From: "Jason Kim" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Friday, September 28, 2001 4:07 PM Subject: Re: Got it1! > Date: Fri, 28 Sep 2001 13:00:00 -0700 > From: "Jason Kim" <[EMAIL PROTECTED]> > Subject: Re: Got it1! > > Not only does case matter, I don't know about the 7.1 installer, but > previous versions asked for the directory that *contains* the redhat > directory, iirc. And when you specify a partition, wouldn't you need to > provide the entire device and partition (like /dev/sda4)? Again, I'm not > familiar with the 7.1 install, so I'm not of much help here, but I hope that > this proves useful. > > -Jason > > > ----- Original Message ----- > From: "David VanHorn" <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Friday, September 28, 2001 10:08 AM > Subject: Re: Got it1! > > > > Date: Fri, 28 Sep 2001 12:03:14 -0500 > > From: David VanHorn <[EMAIL PROTECTED]> > > Subject: Re: Got it1! > > > > At 09:43 AM 9/28/01 -0700, Eiren K. Smith wrote: > > >Date: Fri, 28 Sep 2001 12:29:53 -0400 > > >From: "Eiren K. Smith" <[EMAIL PROTECTED]> > > >Subject: Re: Got it1! > > > > > >Thanks, Jason. I've been trying that, but no joy. Is there a cylinder > limit > > >past which it will not look for the copied files? My D: partition (where > > >I've copied the CD files) follows a ~4GB C: partition. Could that be it? > > > > > >Also, what directory do I need to point to in the "Select Parition" box? > > >I've tried "RedHat/", "" (no path specified), "RedHat/base/", and > > >"RedHat/RPMS/". I've also tried all these without the trailing slash. > Still > > >it says either ""Device /dev/hda5 does not appear to contain Red Hat > CDROM > > >images." and > > > if I type a directory name wrong, I get "Failed to read directory > > >/tmp/hdimage/<whateverthewrongnameis>: No such file or directory". > > > > > >Can you or anyone else lend some advice? > > > > Case matters. RedHat is not the same as redhat > > -- > > Dave's Engineering Page: http://www.dvanhorn.org > > > > Got a need to read Bar codes? http://www.barcodechip.com > > Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and Bookland, > with > > two or five digit supplemental codes, in an 8 pin chip, with NO external > parts. > > > > > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
