Date: Fri, 28 Sep 2001 17:27:37 -0300 From: "Damian D'Onia" <[EMAIL PROTECTED]> Subject: Re: Got it1!
The RH7.1 Instalation Manual (http://www.redhat.com/docs/manuals/linux/RHL-7.1-Manual/install-guide/) is clear: Identify Disk Partition to Install From Note Hard drive installations now require the use of the ISO (or CD-ROM) images instead of just copying an entire installation tree. After placing the required ISO images in a directory, choose to install from the hard drive. You will then point the installation program at that directory to perform the installation. (http://www.redhat.com/docs/manuals/linux/RHL-7.1-Manual/install-guide/s1-install-disk-image.html) Damián. // At 13:07 28/09/01 -0700, you wrote: >Date: Fri, 28 Sep 2001 13:00:00 -0700 >From: "Jason Kim" <[EMAIL PROTECTED]> >Subject: Re: Got it1! > >Not only does case matter, I don't know about the 7.1 installer, but >previous versions asked for the directory that *contains* the redhat >directory, iirc. And when you specify a partition, wouldn't you need to >provide the entire device and partition (like /dev/sda4)? Again, I'm not >familiar with the 7.1 install, so I'm not of much help here, but I hope that >this proves useful. > >-Jason > > >----- Original Message ----- >From: "David VanHorn" <[EMAIL PROTECTED]> >To: "Libretto" <[EMAIL PROTECTED]> >Sent: Friday, September 28, 2001 10:08 AM >Subject: Re: Got it1! > > > > Date: Fri, 28 Sep 2001 12:03:14 -0500 > > From: David VanHorn <[EMAIL PROTECTED]> > > Subject: Re: Got it1! > > > > At 09:43 AM 9/28/01 -0700, Eiren K. Smith wrote: > > >Date: Fri, 28 Sep 2001 12:29:53 -0400 > > >From: "Eiren K. Smith" <[EMAIL PROTECTED]> > > >Subject: Re: Got it1! > > > > > >Thanks, Jason. I've been trying that, but no joy. Is there a cylinder >limit > > >past which it will not look for the copied files? My D: partition (where > > >I've copied the CD files) follows a ~4GB C: partition. Could that be it? > > > > > >Also, what directory do I need to point to in the "Select Parition" box? > > >I've tried "RedHat/", "" (no path specified), "RedHat/base/", and > > >"RedHat/RPMS/". I've also tried all these without the trailing slash. >Still > > >it says either ""Device /dev/hda5 does not appear to contain Red Hat >CDROM > > >images." and > > > if I type a directory name wrong, I get "Failed to read directory > > >/tmp/hdimage/<whateverthewrongnameis>: No such file or directory". > > > > > >Can you or anyone else lend some advice? > > > > Case matters. RedHat is not the same as redhat > > -- > > Dave's Engineering Page: http://www.dvanhorn.org > > > > Got a need to read Bar codes? http://www.barcodechip.com > > Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and Bookland, >with > > two or five digit supplemental codes, in an 8 pin chip, with NO external >parts. > > > > > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > >************************************************************** >http://libretto.basiclink.com - Libretto mailing list >http://libretto.basiclink.com/archive - Archives >http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- >Reply to any of the list messages. The reply mail should be >addressed to: [EMAIL PROTECTED] - Then replace any text >on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ >Do above but with this on subject line: cmd:unsubscribe digest >************************************************************** ----- Damián D'Onia [EMAIL PROTECTED] ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
