The LCS saga continues:

----------- Mark wrote --------------------
Again, for me the key to figuring things out is to do them manually so that
responses to the commands are not hidden by the installation scripts.  So,
from your system console (HMC) try this:
1. ifconfig -a   This command should show you your eth0 and lo devices.  If
not, the LCS module didn't load.
2. ifconfig eth0 205.213.113.123 netmask 255.255.255.0 up  - This should
result in no messages at all.  If it does, report them back here.
3. route add default gw 205.213.113.254 netmask 0.0.0.0 - Again, this
should
result in no messages.
4. ping -c 3 205.213.113.254 - to see if you can reach your gateway.
5. ping -c 3 some.other.ip.addr - to see if you can get beyond your
gateway.
----------------------------------------------------

Excerpt from console log:

ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:06:29:EC:F2:97
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
#
ifconfig eth0 205.213.113.123 netmask 255.255.255.0 up
debug: lcs: new level 0
#
route add default gw 205.213.113.254 netmask 0.0.0.0
#
ping -c 3 205.213.113.254
/bin/sh: ping: not found
#
ping -c 3 205.213.113.190
/bin/sh: ping: not found
#

Thanks............   Larry



**********************************************************
Privileged and/or confidential information may be contained in this message. If you 
are not the addressee indicated in this message (or are not responsible for delivery 
of this message to that person) , you may not copy or deliver this message to anyone. 
In such case, you should destroy this message and notify the sender by reply e-mail.

If you or your employer do not consent to Internet e-mail for messages of this kind, 
please advise the sender.

Shaw Industries, Inc. does not provide or endorse any opinions, conclusions or other 
information in this message that do not relate to the official business of the company.
**********************************************************

Reply via email to