Dave Myers wrote:
>What do these commands show before you start the actual rpm installs.
>cat /proc/dasd/devices
0201(ECKD) at ( 94: 0) is dasda : active at blocksize: 4096, 600840
blocks, 2347 MB
0202(ECKD) at ( 94: 4) is dasdb : active at blocksize: 4096, 600840
blocks, 2347 MB
>mount
rootfs on / type rootfs (rw)
shmfs on / type shm (rw)
devpts on /dev/pts type devpts (rw)
virtual-proc-filesystem on /proc type proc (rw)
/dev/loop0 on /mounts/instsys type cramfs (ro)
//10.26.34.148/MARCYCD on /var/adm/YaST/InstSrcManager/IS_CACHE_0x
00000001/MEDIA type smbfs (0)
>df -k
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 257304 20476 236828 8% /
shmfs 257304 20476 236828 8% /
/dev/loop0 85692 85692 0 100% /mounts/instsys
//10.26.34.148/MARCYCD
607168 607168 0 100% /var/adm/YaST/
InstSrcManager/IS_CACHE_0x00000001/MEDIA
This attempt I removed the small disk I intended to use as SWAP.
So, just the 2 big disks.
My VNC desktop shows "No automatic proposal possible. Please specify
mountpoints manually in the 'Paritioner' dialog."
And under the Software heading: "Not enough disk space even for a
minimal installation!". When I go select the disks and what
goes on them, they appear in the Partition section but the
Software section still says not enough space and I can get no
further.
I'm beginning to suspect my SuSE CD's. The local branch had a hard
time getting the real things and send me some labeled "not for
resale". Hmmm...
Marcy Cortes
