Yes, I am using the send window for the HMC in linux. I can enter commands but it looks like there is no response. What are my options to recover by Linux system at this point?
David Kreuter <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 05/18/2004 12:11 PM Please respond to Linux on 390 Port <[EMAIL PROTECTED]> To [EMAIL PROTECTED] cc Subject Re: Lost access to Linux Are you using the SEND window to send commands in the HMC to linux? David Kreuter ________________________________ From: Linux on 390 Port on behalf of Peter E. Abresch Jr. - at Pepco Sent: Tue 5/18/2004 8:43 AM To: [EMAIL PROTECTED] Subject: Re: Lost access to Linux I am running one Linux in a native LPAR. How can I get access to Linux to run the zipl. I have the HMC console and see messages but it does not seem to respond to any commands. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
