Not having any luck with Hipersockets in SLES10, working great in SLES9
Does this look correct for a Hipersocket device in SLES10?
sles002:/etc/sysconfig/hardware # cat hwcfg-qeth-bus-ccw-0.0.0704
CCW_CHAN_IDS=''
CCW_CHAN_MODE=''
CCW_CHAN_NUM='3'
LCS_LANCMD_TIMEOUT=''
MODULE=''
MODULE_OPTIONS=''
QETH_IPA_TAKEOVER='0'
QETH_LAYER2_SUPPORT='0'
QETH_OPTIONS=''
SCRIPTDOWN='hwdown-ccw'
SCRIPTUP='hwup-ccw'
SCRIPTUP_ccw='hwup-ccw'
SCRIPTUP_ccwgroup='hwup-qeth'
STARTMODE='auto'
I'm getting these messages at startup.
Waiting for mandatory devices: qeth-bus-ccw-0.0.0704 qeth-bus-ccw-0.0.0705
qeth-bus-ccw-0.0.0706 __NSC__
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
qeth-bus-ccw-0.0.0704 No interface found
[1A..failed qeth-bus-ccw-0.0.0705 No interface found
[1A..failed qeth-bus-ccw-0.0.0706 No interface found
[1A..failedSetting up service network . . . . . . . . . . . . .
. . ...failed
And I've verified that the devices are connected to the guest.
2009/3/31 John Schnitzler Jr <jnsch...@us.ibm.com>
>
> >Are Hipersocket devices supposed to show up in Yast as 3 different
> devices,
> >where an OSA adapter shows up as 1?SLES10 SP2
>
> >IBM OSA Express Network card (0.0.1d00)│
> >IBM Hipersocket (0.0.0704) │Not configured
> > │
> >IBM Hipersocket (0.0.0705) │Not configured
> > │
> >IBM Hipersocket (0.0.0706) │Not configured
>
>
> Mark, Yes, until they are configured, the OSA is the same way.
>
> John,
--
Mark Pace
Mainline Information Systems
1700 Summit Lake Drive
Tallahassee, FL. 32317
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
