The ccwchanids need to be filled in. Sles9 would autosense the three devices associated with the group device, sles10 does not.
You actually have to put in the 0.0704,0.0.0705,0.0.0706 between the quotes. Ron Sent via BlackBerry by AT&T -----Original Message----- From: "roger.ship...@daimler.com" <roger.ship...@daimler.com> Date: Tue, 31 Mar 2009 14:47:49 To: LINUX-390@VM.MARIST.EDU<LINUX-390@VM.MARIST.EDU> Subject: Re: Hipersocket Look at this manual..don't worry about the title..It has a great write up and directions on HIPER. We just went from SLES9 th 10 and I use the instructions: http://www.redbooks.ibm.com/redpieces/pdfs/sg246847.pdf example: echo 0.0.b500,0.0.b501,0.0.b502 > /sys/bus/ccwgroup/drivers/qeth/group echo 1 > /sys/devices/qeth/0.0.b500/online . cat /sys/devices/qeth/0.0.b500/if_name . response should be hsi0 ifconfig hsi0 xx.xxx.xxx.xxx netmask 255.255.255.0 mtu 32768 up mpac...@gmail.com Sent by: LINUX-390@VM.MARIST.EDU 03/31/2009 12:42 PM Please respond to LINUX-390@VM.MARIST.EDU To LINUX-390@VM.MARIST.EDU cc Subject Re: Hipersocket Not having any luck with Hipersockets in SLES10, working great in SLES9 Does this look correct for a Hipersocket device in SLES10? sles002:/etc/sysconfig/hardware # cat hwcfg-qeth-bus-ccw-0.0.0704 CCW_CHAN_IDS='' CCW_CHAN_MODE='' CCW_CHAN_NUM='3' LCS_LANCMD_TIMEOUT='' MODULE='' MODULE_OPTIONS='' QETH_IPA_TAKEOVER='0' QETH_LAYER2_SUPPORT='0' QETH_OPTIONS='' SCRIPTDOWN='hwdown-ccw' SCRIPTUP='hwup-ccw' SCRIPTUP_ccw='hwup-ccw' SCRIPTUP_ccwgroup='hwup-qeth' STARTMODE='auto' I'm getting these messages at startup. Waiting for mandatory devices: qeth-bus-ccw-0.0.0704 qeth-bus-ccw-0.0.0705 qeth-bus-ccw-0.0.0706__NSC__ 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 qeth-bus-ccw-0.0.0704 No interface found [1A..failed qeth-bus-ccw-0.0.0705 No interface found [1A..failed qeth-bus-ccw-0.0.0706 No interface found [1A..failedSetting up service network . . . . . . . . . . . . . . . ...failed And I've verified that the devices are connected to the guest. 2009/3/31 John Schnitzler Jr <jnsch...@us.ibm.com> > > >Are Hipersocket devices supposed to show up in Yast as 3 different > devices, > >where an OSA adapter shows up as 1?SLES10 SP2 > > >IBM OSA Express Network card (0.0.1d00)│ > >IBM Hipersocket (0.0.0704) │Not configured > > │ > >IBM Hipersocket (0.0.0705) │Not configured > > │ > >IBM Hipersocket (0.0.0706) │Not configured > > > Mark, Yes, until they are configured, the OSA is the same way. > > John, -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 If you are not the intended addressee, please inform us immediately that you have received this e-mail in error, and delete it. We thank you for your cooperation.