Thank you! 2009/3/31 <roger.ship...@daimler.com>
> Look at this manual..don't worry about the title..It has a great write up > and directions on HIPER. > We just went from SLES9 th 10 and I use the instructions: > > http://www.redbooks.ibm.com/redpieces/pdfs/sg246847.pdf > > > example: > echo 0.0.b500,0.0.b501,0.0.b502 > /sys/bus/ccwgroup/drivers/qeth/group > echo 1 > /sys/devices/qeth/0.0.b500/online > . cat /sys/devices/qeth/0.0.b500/if_name > . response should be hsi0 > ifconfig hsi0 xx.xxx.xxx.xxx netmask 255.255.255.0 mtu 32768 up > > > > mpac...@gmail.com > Sent by: LINUX-390@VM.MARIST.EDU > 03/31/2009 12:42 PM > Please respond to > LINUX-390@VM.MARIST.EDU > > > To > LINUX-390@VM.MARIST.EDU > cc > > Subject > Re: Hipersocket > > > > > > > Not having any luck with Hipersockets in SLES10, working great in SLES9 > Does this look correct for a Hipersocket device in SLES10? > > sles002:/etc/sysconfig/hardware # cat hwcfg-qeth-bus-ccw-0.0.0704 > CCW_CHAN_IDS='' > CCW_CHAN_MODE='' > CCW_CHAN_NUM='3' > LCS_LANCMD_TIMEOUT='' > MODULE='' > MODULE_OPTIONS='' > QETH_IPA_TAKEOVER='0' > QETH_LAYER2_SUPPORT='0' > QETH_OPTIONS='' > SCRIPTDOWN='hwdown-ccw' > SCRIPTUP='hwup-ccw' > SCRIPTUP_ccw='hwup-ccw' > SCRIPTUP_ccwgroup='hwup-qeth' > STARTMODE='auto' > > I'm getting these messages at startup. > Waiting for mandatory devices: qeth-bus-ccw-0.0.0704 > qeth-bus-ccw-0.0.0705 > qeth-bus-ccw-0.0.0706 __NSC__ > 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 > qeth-bus-ccw-0.0.0704 No interface found > [1A..failed qeth-bus-ccw-0.0.0705 No interface found > [1A..failed qeth-bus-ccw-0.0.0706 No interface found > [1A..failedSetting up service network . . . . . . . . . . . . > . > . . ...failed > > And I've verified that the devices are connected to the guest. > 2009/3/31 John Schnitzler Jr <jnsch...@us.ibm.com> > > > > > >Are Hipersocket devices supposed to show up in Yast as 3 different > > devices, > > >where an OSA adapter shows up as 1?SLES10 SP2 > > > > >IBM OSA Express Network card (0.0.1d00)│ > > >IBM Hipersocket (0.0.0704) │Not configured > > > │ > > >IBM Hipersocket (0.0.0705) │Not configured > > > │ > > >IBM Hipersocket (0.0.0706) │Not configured > > > > > > Mark, Yes, until they are configured, the OSA is the same way. > > > > John, > > > > > -- > Mark Pace > Mainline Information Systems > 1700 Summit Lake Drive > Tallahassee, FL. 32317 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > If you are not the intended addressee, please inform us immediately that > you have received this e-mail in error, and delete it. We thank you for your > cooperation. -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
