Look at this manual..don't worry about the title..It has a great write up 
and directions on HIPER.
We just went from SLES9 th 10 and I use the instructions:

 http://www.redbooks.ibm.com/redpieces/pdfs/sg246847.pdf


example:
  echo 0.0.b500,0.0.b501,0.0.b502 > /sys/bus/ccwgroup/drivers/qeth/group 
  echo 1 > /sys/devices/qeth/0.0.b500/online 
 . cat /sys/devices/qeth/0.0.b500/if_name 
 . response should be   hsi0 
 ifconfig hsi0 xx.xxx.xxx.xxx netmask 255.255.255.0 mtu 32768 up 



mpac...@gmail.com 
Sent by: LINUX-390@VM.MARIST.EDU
03/31/2009 12:42 PM
Please respond to
LINUX-390@VM.MARIST.EDU


To
LINUX-390@VM.MARIST.EDU
cc

Subject
Re: Hipersocket






Not having any luck with Hipersockets in SLES10, working great in SLES9
Does this look correct for a Hipersocket device in SLES10?

sles002:/etc/sysconfig/hardware # cat hwcfg-qeth-bus-ccw-0.0.0704
CCW_CHAN_IDS=''
CCW_CHAN_MODE=''
CCW_CHAN_NUM='3'
LCS_LANCMD_TIMEOUT=''
MODULE=''
MODULE_OPTIONS=''
QETH_IPA_TAKEOVER='0'
QETH_LAYER2_SUPPORT='0'
QETH_OPTIONS=''
SCRIPTDOWN='hwdown-ccw'
SCRIPTUP='hwup-ccw'
SCRIPTUP_ccw='hwup-ccw'
SCRIPTUP_ccwgroup='hwup-qeth'
STARTMODE='auto'

I'm getting these messages at startup.
Waiting for mandatory devices:  qeth-bus-ccw-0.0.0704 
qeth-bus-ccw-0.0.0705
qeth-bus-ccw-0.0.0706 __NSC__
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
    qeth-bus-ccw-0.0.0704               No interface found
[1A..failed    qeth-bus-ccw-0.0.0705               No interface found
[1A..failed    qeth-bus-ccw-0.0.0706               No interface found
[1A..failedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  . 
.
 .  .  ...failed

And I've verified that the devices are connected to the guest.
2009/3/31 John Schnitzler Jr <jnsch...@us.ibm.com>

>
> >Are Hipersocket devices supposed to show up in Yast as 3 different
> devices,
> >where an OSA adapter shows up as 1?SLES10 SP2
>
> >IBM OSA Express Network card (0.0.1d00)│
> >IBM Hipersocket (0.0.0704)             │Not configured
> >  │
> >IBM Hipersocket (0.0.0705)             │Not configured
> >  │
> >IBM Hipersocket (0.0.0706)             │Not configured
>
>
> Mark, Yes, until they are configured, the OSA is the same way.
>
> John,




-- 
Mark Pace
Mainline Information Systems
1700 Summit Lake Drive
Tallahassee, FL. 32317

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or 
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390



If you are not the intended addressee, please inform us immediately that you 
have received this e-mail in error, and delete it. We thank you for your 
cooperation.  

Reply via email to