I have reset OSA ports by using the OSA Advanced Facilities dialog in the HMC. It takes about 15 minutes for the port to actually reset after you hit enter though. IBM Hardware Support walked me through it the first time and warned me to be patient for the actual reset. The HMC Operations Guide has the path to this function.
Craig Moody System Z Technical Specialist Levi, Ray and Shoup, Inc 2401 West Monroe St Springfield, Il 62704 217 793-3800 x1813 -----Original Message----- From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Mark Post Sent: Tuesday, July 21, 2009 1:26 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: OSA/Express Assistance >>> On 7/21/2009 at 2:08 PM, David Stuart <david.stu...@ventura.org> wrote: > Mace, > > Oh, I hope a POR isn't required. The OSA/Express cards are shared across > multiple LPARs... I doubt very much that a POR will be needed. What does "ifconfig -a" and "lsqeth" show you? Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
