Hi Roger, your boot.messages do not show any message refering to 0.0.7000 or hsi0. Your hsi0-device is in state SOFTSETUP, which means it has been activated successfully; just the ifup step fails. The configuration file for ifup is /etc/sysconfig/network/ifcfg-hsi0. Can you check the definitions of this file?
By the way, you have chosen layer2=1 for your hsi0-device. This is ok, but it allows communication to other layer2 HiperSockets participants only, no layer3 HiperSockets participants. Regards, Ursula Braun, IBM Germany On Tue, 2011-11-08 at 08:39 +0100, Roger Evans wrote: > Hi, Ursula > > uname -a > Linux DPRODDB2 2.6.32.46-0.3-default #1 SMP 2011-09-29 17:49:31 +0200 > s390x s390x s390x GNU/Linux > > lsqeth > ... [other devices] > Device name : hsi0 > --------------------------------------------- > card_type : HiperSockets > cdev0 : 0.0.7000 > cdev1 : 0.0.7001 > cdev2 : 0.0.7002 > chpid : F1 > online : 1 > portname : no portname required > portno : 0 > state : SOFTSETUP > priority_queueing : always queue 2 > buffer_count : 16 > layer2 : 1 > isolation : none > > I am attaching the results of the dmesg command > > > Med vennlig hilsen > > Roger Evans ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/