Forgot to send the info you requested: DPRODDB2:/etc/sysconfig/network # cat ifcfg-hsi0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='10.5.2.11/16' LLADDR='00:00:00:00:00:00' MTU='' NAME='Hipersocket (0.0.7000)' NETWORK='' REMOTE_IPADDR='' STARTMODE='manual' USERCONTROL='no' ------------------------------------------------------------ Roger
On Tue, 2011-11-08 at 09:37 +0100, Ursula Braun wrote: > Hi Roger, > > your boot.messages do not show any message refering to 0.0.7000 or hsi0. > Your hsi0-device is in state SOFTSETUP, which means it has been > activated successfully; just the ifup step fails. The configuration file > for ifup is /etc/sysconfig/network/ifcfg-hsi0. Can you check the > definitions of this file? > > By the way, you have chosen layer2=1 for your hsi0-device. This is ok, > but it allows communication to other layer2 HiperSockets participants > only, no layer3 HiperSockets participants. > > Regards, Ursula Braun, IBM Germany > > On Tue, 2011-11-08 at 08:39 +0100, Roger Evans wrote: > > Hi, Ursula > > > > uname -a > > Linux DPRODDB2 2.6.32.46-0.3-default #1 SMP 2011-09-29 17:49:31 +0200 > > s390x s390x s390x GNU/Linux > > > > lsqeth > > ... [other devices] > > Device name : hsi0 > > --------------------------------------------- > > card_type : HiperSockets > > cdev0 : 0.0.7000 > > cdev1 : 0.0.7001 > > cdev2 : 0.0.7002 > > chpid : F1 > > online : 1 > > portname : no portname required > > portno : 0 > > state : SOFTSETUP > > priority_queueing : always queue 2 > > buffer_count : 16 > > layer2 : 1 > > isolation : none > > > > I am attaching the results of the dmesg command > > > > > > Med vennlig hilsen > > > > Roger Evans > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/