>>> On 4/20/2016 at 10:28 PM, Dave Myers <dave.my...@siriuscom.com> wrote: > VLAN def in system config is: > define vswitch vsw1 rdev 400.p1 vlan 229
It's been a while since I played with this stuff, but one thing I know for sure: If the Linux guest has to be aware of which VLAN(s) it's supposed to be seeing, that is not supported by the installer. You would need to manually intervene to set up the 802.1q parameters for it to work. So, whether the VSWITCH itself is VLAN aware or not is irrelevant to the Linux guest. As soon as the Linux guest itself needs to be VLAN aware, you're on your own. (I've done it myself and it's not hard, but it _is_ outside of what the installer can handle automagicaly at the SLES11 SP4 level.) Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/